RTMNU Final Electrical syllabus

RTMNU · Final Year B.Tech Electrical Engineering · CBCS

High Voltage Engineering

BTCHEE701T · Professional Elective III · Semester VII · 3 credits · College 30 + university 70

One of the Professional Elective III options.

  1. Unit 1: Breakdown Mechanism in Dielectrics

    8 hours

    Ionisation, Townsend's criteria, breakdown in electronegative gases, streamer theory and Paschen's law; breakdown in vacuum, liquid and solid dielectrics, treeing, tracking and internal discharges.

    Examined in the 70-mark end-semester paper

    • Townsend's theory of breakdown
    • Breakdown in electronegative gases and time lags
    • Streamer theory
    • Paschen's law
    • Breakdown in vacuum
    • Breakdown in liquid dielectrics
    • Breakdown in solid dielectrics
    • Treeing and tracking
  2. Unit 2: Lightning and Switching Overvoltages

    6 hours

    Lightning mechanism, stroke types and parameters, switching surges and power-frequency overvoltages, and protection of lines by ground wires, lightning arresters and surge absorbers, with volt-time characteristics.

    Examined in the 70-mark end-semester paper

    • Lightning phenomenon
    • Switching surges
    • Ground wires and tower footing resistance
    • Surge diverters and overvoltage protection
    • Insulation coordination
  3. Unit 3: Generation of High Voltages and Currents

    8 hours

    High DC voltages by rectifiers, doublers and multipliers, high AC voltages by cascade and resonant transformers and at high frequency, standard impulse wave shapes, the Marx circuit and its tripping, switching surges and impulse currents.

    Examined in the 70-mark end-semester paper

    • Generation of high DC voltages
    • Generation of high AC voltages
    • Generation of high-frequency AC voltages
    • Impulse voltage waveshape
    • Marx impulse generator
    • Impulse current generation
  4. Unit 4: Measurement of High Voltages and Currents

    8 hours

    High AC and DC voltages by microammeter, generating voltmeter, resistive and capacitive dividers, CVTs, peak-reading voltmeters and sphere gaps; impulse voltages by dividers; high AC, DC, high-frequency and impulse currents.

    Examined in the 70-mark end-semester paper

    • Measurement of high DC and AC voltages
    • Potential dividers
    • Sphere gap measurement
    • Measurement of impulse voltages
    • Measurement of high currents
  5. Unit 5: Non-Destructive and High Voltage Testing of Apparatus

    6 hours

    Dielectric constant and loss measurement with the high-voltage Schering bridge and transformer ratio-arm bridges, partial discharge measurement, and dry, wet, impulse and withstand tests on insulators, cables and transformers.

    Examined in the 70-mark end-semester paper

    • Non-destructive testing of insulation
    • Schering bridge
    • Dielectric loss and partial discharge measurement
    • Testing of insulators and bushings
    • Testing of cables and surge arresters
    • Testing of circuit breakers and transformers

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).