RTMNU Final Electrical syllabus

RTMNU · Final Year B.Tech Electrical Engineering · CBCS

Flexible AC Transmission System (FACTS)

BTCHEE702T · Professional Elective IV · Semester VII · 3 credits · College 30 + university 70

One of the Professional Elective IV options.

  1. Unit 1: FACTS Concept and General System Considerations

    8 hours

    Transmission interconnection, power flow in an AC system, factors limiting loading capability, power flow and dynamic stability, controllable parameters and FACTS controllers.

    Examined in the 70-mark end-semester paper

    • Power flow and loading capability of AC interconnections
    • Power flow control in parallel paths
    • Need for FACTS
    • Types of FACTS controllers
  2. Unit 2: Voltage-Source and Current-Source Converters

    7 hours

    Single- and three-phase full-wave bridge converters, transformer connections for 12-pulse operation, three-level converters, harmonic elimination and voltage control, and current-source versus voltage-source converters.

    Examined in the 70-mark end-semester paper

    • Voltage and current source converters
    • Twelve-pulse converters and harmonics
    • Three-level converters and harmonic elimination
  3. Unit 3: Static Shunt Compensators: SVC and STATCOM

    7 hours

    Objectives of shunt compensation — midpoint voltage regulation, voltage-instability prevention and transient stability — methods of controllable VAR generation, the SVC and STATCOM compared.

    Examined in the 70-mark end-semester paper

    • Shunt compensation for midpoint voltage and stability
    • Methods of controllable VAR generation
    • SVC
    • STATCOM
    • SVC versus STATCOM
  4. Unit 4: Static Series Compensators: GCSC, TSSC, TCSC and SSSC

    7 hours

    Objectives of series compensation and transient stability improvement, variable-impedance series compensators and the switching-converter SSSC.

    Examined in the 70-mark end-semester paper

    • Objectives of series compensation
    • GTO thyristor-controlled series capacitor
    • Thyristor-switched series capacitor
    • TCSC and SSSC
  5. Unit 5: Voltage and Phase Angle Regulators; UPFC and IPFC

    7 hours

    Thyristor-controlled voltage and phase angle regulators, and the operating principles of the unified and interline power flow controllers.

    Examined in the 70-mark end-semester paper

    • Voltage and phase angle regulators: TCVR and TCPAR
    • Unified power flow controller
    • Interline power flow controller

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).