RTMNU Final Electrical syllabus

RTMNU · Final Year B.Tech Electrical Engineering · CBCS

EHVAC-HVDC Transmission System

BTCHEE803T · Professional Elective VII · Semester VIII · 3 credits · College 30 + university 70

One of the Professional Elective VII options.

  1. Unit 1: Power Handling Capacity and Fields of EHV AC Lines

    8 hours

    Power handling capacities of EHV AC lines, voltage gradients, the field of point and line charges, Maxwell's potential coefficients and the Mangoldt formula.

    Examined in the 70-mark end-semester paper

    • Need for EHV transmission
    • Power handling capacity of EHV AC lines
    • Charge-potential relations
    • Surface voltage gradient on conductors
    • Mangoldt formula
  2. Unit 2: Electrostatic Field and Corona

    6 hours

    The electrostatic field of EHV lines, corona types and critical disruptive voltages, factors affecting corona, reducing corona loss, corona current and charge-voltage diagrams, audible noise and radio interference.

    Examined in the 70-mark end-semester paper

    • Electrostatic field of EHV lines
    • Corona inception voltage
    • Corona loss
    • Audible noise
    • Radio interference from corona
  3. Unit 3: HVDC Systems

    6 hours

    EHVAC and HVDC compared, kinds of DC link, earth electrodes and earth returns, and multi-terminal HVDC with series and parallel converters.

    Examined in the 70-mark end-semester paper

    • HVDC versus EHVAC transmission
    • Classification of HVDC links
    • Earth electrodes and earth return in HVDC
    • Multi-terminal HVDC
  4. Unit 4: HVDC Power Flow Control, Harmonic Filters and Reactive Power

    8 hours

    Constant current, voltage, ignition and extinction angle control, parallel AC and DC links, AC and DC harmonic filters and their design, and the reactive power needs of HVDC converters.

    Examined in the 70-mark end-semester paper

    • HVDC converter control: CIA, CC and CEA
    • Parallel operation of AC and DC links
    • AC and DC filters
    • Reactive power requirements of HVDC converters
  5. Unit 5: HVDC Circuit Breakers and Protection

    8 hours

    HVDC circuit breakers and DC current interruption, the MRTB, fault clearing and protective zones, line and substation protection against short circuits and overvoltages, and insulation coordination of AC and DC systems.

    Examined in the 70-mark end-semester paper

    • HVDC circuit breakers and DC current interruption
    • HVDC protection
    • Insulation design for EHV lines

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).