RTMNU Final Electrical syllabus

RTMNU · Final Year B.Tech Electrical Engineering · CBCS

Advanced Power Electronics

BTCHEE701T · Professional Elective III · Semester VII · 3 credits · College 30 + university 70

One of the Professional Elective III options.

  1. Unit 1: DC-DC Switched Mode Converters

    8 hours

    Buck, boost, buck-boost and Cuk topologies and the full-bridge DC-DC converter: working principles, modes of operation, waveforms, applications, merits and demerits.

    Examined in the 70-mark end-semester paper

    • Buck converter
    • Boost converter
    • Buck-boost converter
    • Cuk converter
    • Half-bridge and full-bridge DC power supplies
  2. Unit 2: DC-AC Switched Mode Inverters

    7 hours

    Single-phase and three-phase inverters and the sinusoidal PWM inverter: working principles, modes of operation, circuit analysis and input-output voltage relationships.

    Examined in the 70-mark end-semester paper

    • Single-phase full-bridge inverter
    • Three-phase inverter: 120 and 180 degree modes
    • PWM techniques
    • Voltage control of single and three-phase inverters
  3. Unit 3: Multilevel Inverters

    7 hours

    Diode-clamped, flying-capacitor and cascaded H-bridge multilevel inverters with equal and unequal DC voltages, carrier and space vector modulation of multilevel inverters, and neutral point balancing.

    Examined in the 70-mark end-semester paper

    • Diode-clamped, flying-capacitor and cascaded multilevel inverters
    • Cascaded H-bridge multilevel inverters
    • Carrier-based and space vector PWM for multilevel inverters
    • Neutral point balancing in multilevel inverters
  4. Unit 4: Resonant Converters

    7 hours

    Zero-voltage and zero-current switching, resonant switch converters compared with hard switching, and switching locus diagrams.

    Examined in the 70-mark end-semester paper

    • Resonant converters: ZCS and ZVS
    • Series, parallel and class E resonant inverters
    • Soft and hard switching and switching loci
  5. Unit 5: Power Supplies

    7 hours

    Flyback, forward, push-pull, half-bridge and full-bridge DC power supplies, and switched-mode, resonant and bidirectional AC power supplies.

    Examined in the 70-mark end-semester paper

    • Flyback, forward and push-pull converters
    • Half-bridge and full-bridge DC power supplies
    • Switched mode power supplies
    • Switched-mode, resonant and bidirectional AC power supplies

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).