RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Water & Wastewater Treatment

BTCVE704T · Elective VI · Semester VII · 3 credits · College 30 + university 70

One of the Elective VI options.

  1. Unit 1: Aeration, Coagulation–Flocculation and Sedimentation

    7 hours

    Objectives, unit operations and flow sheet of water treatment; aerators and the two-film theory; coagulation and flocculation, coagulants and rapid and slow mixing devices; discrete and flocculent settling, sedimentation tanks and clariflocculators.

    Examined in the 70-mark end-semester paper

    • Aeration
    • Coagulation and flocculation
    • Design of flash mixers and flocculators
    • Sedimentation and settling tanks
  2. Unit 2: Filtration, Disinfection and Minor Methods

    7 hours

    Filtration mechanism and filters, design of rapid sand filters and filter media; disinfection kinetics, chlorination and breakpoint chlorination; removal of iron, manganese and fluoride, and recent developments.

    Examined in the 70-mark end-semester paper

    • Rapid sand filters
    • Disinfection and chlorination
    • Iron, manganese and fluoride removal
  3. Unit 3: Characteristics and Disposal of Wastewater

    7 hours

    Sources and physical and chemical characteristics of wastewater, DO, BOD and COD with the BOD rate constant; disposal by dilution and on land, and the Streeter–Phelps equation.

    Examined in the 70-mark end-semester paper

    • Wastewater characteristics and standards
    • Water quality parameters: BOD, COD and DO
    • Self-purification of streams
    • Oxygen sag curve and Streeter-Phelps equation
  4. Unit 4: Preliminary and Primary Treatment

    7 hours

    The wastewater treatment flow sheet and the design of screens, grit chambers and primary settling tanks.

    Examined in the 70-mark end-semester paper

    • Screens and grit chambers
    • Primary sedimentation tanks
  5. Unit 5: Secondary Treatment

    6 hours

    Biological treatment, the activated sludge process and its design, aerated lagoons and stabilisation ponds; sludge treatment, aerobic and anaerobic digestion, UASB and hybrid reactors, and sludge drying beds.

    Examined in the 70-mark end-semester paper

    • Activated sludge process
    • Design of the activated sludge process
    • Oxidation ponds and sludge disposal
    • UASB reactors and membrane bioreactors
    • Sludge drying beds

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).