RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Pavement Analysis & Design

BTCVE704T · Elective VI · Semester VII · 3 credits · College 30 + university 70

One of the Elective VI options.

  1. Unit 1: General and Design Parameters

    8 hours

    Pavement types and components, factors in design and performance; design wheel and standard axle loads, aircraft undercarriages, tyre and contact pressure, ESWL for flexible and rigid pavements, repeated loads and EWL factors, and serviceability.

    Examined in the 70-mark end-semester paper

    • Types of pavements
    • Factors affecting pavement design
    • Wheel loads for highways and airports
    • ESWL and equivalent wheel load factors
    • Aircraft loads on pavements
  2. Unit 2: Analysis of Flexible and Rigid Pavements

    8 hours

    Stresses, strains and deflections in one-layer (Boussinesq), two-layer (Burmister) and multi-layer systems, layer equivalence and influence charts; wheel load, warping, frictional and combined stresses in rigid pavements.

    Examined in the 70-mark end-semester paper

    • Layered theory of flexible pavements
    • Stresses in rigid pavements
    • Westergaard's analysis
  3. Unit 3: Design by IRC and AASHTO Methods

    8 hours

    Flexible and rigid pavement design to the latest IRC codes, and the AASHTO method.

    Examined in the 70-mark end-semester paper

    • Flexible pavement design to IRC 37
    • Rigid pavement design to IRC 58
    • AASHTO and Asphalt Institute methods
  4. Unit 4: Rigid Pavements

    8 hours

    Functions of rigid pavements, design of concrete pavements for roads and runways to IRC, longitudinal, contraction and expansion joints, and the PCA and AASHTO methods.

    Examined in the 70-mark end-semester paper

    • Joints in concrete pavements
    • Airport pavement design methods
    • PCA method for rigid pavements
  5. Unit 5: Pavement Testing and Evaluation

    8 hours

    Failures of flexible and rigid pavements, condition surveys, unevenness, rut depth, profilometers, bump integrators, the Benkelman beam and the falling weight deflectometer; maintenance, rehabilitation and strengthening.

    Examined in the 70-mark end-semester paper

    • Pavement distresses
    • Pavement evaluation: roughness and Benkelman beam
    • Falling weight deflectometer
    • Overlay design to IRC 81

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).