RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Hydropower Engineering

BTCVE703T · Elective V · Semester VII · 3 credits · College 30 + university 70

One of the Elective V options.

  1. Unit 1: Introduction and Types of Hydropower Plants

    8 hours

    Sources of energy and water power, estimation of potential, run-of-river, valley dam, diversion canal and high-head plants, storage and pondage, tidal and wave power, pumped storage, and small and mini hydropower.

    Examined in the 70-mark end-semester paper

    • Elements of a hydropower scheme
    • Installed capacity and energy potential
    • Classification of hydropower plants
    • Pumped storage plants
    • Small, mini and tidal hydropower
  2. Unit 2: Water Conveyance System and Penstocks

    8 hours

    Power canals, their alignment and design, flumes, covered conduits and tunnels; penstock classification, design, economical diameter, anchor blocks, valves, bends and manifolds.

    Examined in the 70-mark end-semester paper

    • Power canals, flumes and tunnels
    • Penstocks
    • Economical penstock diameter and anchor blocks
  3. Unit 3: Water Hammer and Surge Tanks

    8 hours

    Water hammer from load acceptance and rejection, the equation for a uniform penstock and Allievi's chart; types, functions, location, hydraulic design and stability of surge tanks, and channel surges.

    Examined in the 70-mark end-semester paper

    • Water hammer
    • Surge tanks
  4. Unit 4: Intakes and Turbines

    6 hours

    Intake types, locations, losses, trash racks and gates, forebays and balancing tanks; turbine types, layouts, specific speed, flow equations and characteristics.

    Examined in the 70-mark end-semester paper

    • Intakes and trash racks
    • Forebays and balancing tanks
    • Selection and design of hydraulic turbines
  5. Unit 5: Power House

    7 hours

    Power house types, layouts and dimensions; electrical load on turbines — load curves and load, capacity, utilisation and diversity factors and load duration curves.

    Examined in the 70-mark end-semester paper

    • Powerhouse layout
    • Load curves and load factors
    • Flow duration curves

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).