RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Air Pollution & Solid Waste Management

BTCVE703T · Elective V · Semester VII · 3 credits · College 30 + university 70

One of the Elective V options.

  1. Unit 1: Introduction to Air Pollution

    7 hours

    The atmosphere and its zones, sources and classes of pollutants, effects on health, vegetation, materials and ecosystems, ozone depletion, climate change and acid rain; meteorology — atmospheric stability, plume behaviour and wind roses — the Air Quality Index and air quality standards.

    Examined in the 70-mark end-semester paper

    • Classification and sources of air pollutants
    • Effects of air pollution on health, plants and property
    • Global effects of air pollution
    • Lapse rates and atmospheric stability
    • Plume behaviour
    • Wind rose diagrams
    • Air Quality Index and NCAP
    • Air quality and emission standards
  2. Unit 2: Air Sampling and Pollution Control

    8 hours

    Ambient and stack sampling, collection of particulate and gaseous pollutants, site selection, stack height; control of particulates and gases with gravity settlers, cyclones, bag filters, electrostatic precipitators and wet scrubbers.

    Examined in the 70-mark end-semester paper

    • Ambient air sampling
    • Stack monitoring and isokinetic sampling
    • Stack height and plume rise
    • Settling chambers and cyclones
    • Fabric filters and electrostatic precipitators
    • Scrubbers
    • Control of gaseous pollutants
  3. Unit 3: Solid Waste: Generation, Collection and Transport

    7 hours

    Sources, quantity, composition and characteristics of solid waste, sampling and analysis; collection methods and equipment, transfer stations and route optimisation.

    Examined in the 70-mark end-semester paper

    • Sources and types of solid waste
    • Characteristics and generation of municipal solid waste
    • Collection systems
    • Transfer and transport of solid waste
    • Route optimisation
  4. Unit 4: Processing and Disposal of Solid Waste

    7 hours

    Processing methods and the 3R concept, composting and the factors affecting it, and sanitary landfills — site requirements, methods and leachate management.

    Examined in the 70-mark end-semester paper

    • Segregation and material recovery
    • Recycling and the circular economy
    • Composting methods
    • Sanitary landfill design
    • Leachate and landfill gas
  5. Unit 5: Thermal Treatment and Control of Gases

    7 hours

    Incineration and incinerators, pyrolysis, gasification, refuse-derived fuel and biogas; carbon footprint and emerging strategies to mitigate air pollution.

    Examined in the 70-mark end-semester paper

    • Incineration
    • Pyrolysis, RDF and gasification
    • Anaerobic digestion and biogas
    • Carbon footprint estimation
    • Emerging technologies for air pollution mitigation

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).