RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Advanced RCC Design

BTCVE702T · Elective IV · Semester VII · 3 credits · College 30 + university 70

One of the Elective IV options. A 4-hour university paper. The syllabus has four units.

  1. Unit 1: Overhead Circular Service Reservoirs

    9 hours

    Design of overhead circular service reservoirs to IS 3370 (2021), analysis of the staging by the cantilever method, and analysis and design for earthquake to IS 1893 (Part II) 2014.

    Examined in the 70-mark end-semester paper

    • IS code provisions for water tanks
    • Design of circular water tanks
    • Elevated tanks and staging
    • Seismic coefficient method
  2. Unit 2: Highway Bridges

    9 hours

    Design of slab-type and two- or three-girder highway bridges for IRC loading and equivalent UDL (IRC 6:2017).

    Examined in the 70-mark end-semester paper

    • Bridge loading standards
    • Design of slab culverts
    • Deck slabs and bridge girders
    • Courbon's method
  3. Unit 3: Building Frames

    9 hours

    Limit state analysis and design of building frames up to two bays and two storeys, including their foundations.

    Examined in the 70-mark end-semester paper

    • Substitute frame analysis
    • Design of RC frames for gravity and lateral loads
    • Isolated footings
  4. Unit 4: Cylindrical Shells and Silos

    9 hours

    Cylindrical shells by beam theory — advantages, assumptions, range of validity and beam analysis — shells with and without edge beams, and the limit state design of silos.

    Examined in the 70-mark end-semester paper

    • Cylindrical shell roofs by beam theory
    • Shells with and without edge beams
    • Design of RC silos

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).