PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Power Plant and Energy Engineering

MECHPEC-03C · Programme Elective III · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective III options.

  1. Unit 1: Introduction

    5 hours

    Classification of energy sources; the organisation of India's power sector: NTPC, NHPC, NPCIL and PGCIL; the private sector and power distribution.

    Examined in the 70-mark end-semester paper

    • Global and Indian energy scenario
  2. Unit 2: Loads on Power Plants

    8 hours

    Load curves and load factors and the effect of variable load; thermal, hydro, nuclear and diesel plants compared; peak-load plants, pumped storage and compressed-air storage; sharing load between base and peak stations.

    Examined in the 70-mark end-semester paper

    • Load curves and tariffs
    • Load, capacity, diversity and demand factors
    • Energy storage systems
  3. Unit 3: Economic Analysis of Power Plants

    7 hours

    Cost of electrical energy, fixed and operating costs, depreciation; site selection for thermal, hydro and nuclear stations; tariffs; choosing boilers, prime movers and the size and number of units.

    Examined in the 70-mark end-semester paper

    • Economics of power generation
    • Depreciation methods
  4. Unit 4: Solar Energy

    8 hours

    Solar radiation and its measurement by pyranometer and pyrheliometer; solar geometry, LAT and SCT; concentrators; liquid flat-plate collectors and their performance; solar ponds, low- and high-temperature solar plants, photovoltaics and heliostats.

    Examined in the 70-mark end-semester paper

    • Solar radiation and its measurement
    • Solar angles
    • Flat plate collectors
    • Concentrating collectors
    • Solar thermal and photovoltaic plants
  5. Unit 5: Other Non-Conventional Power Plants

    7 hours

    Wind power and the components and classes of WECS, horizontal- and vertical-axis machines; tidal, wave, OTEC, geothermal and MHD power; hybrid plants and the challenges of commercialisation.

    Examined in the 70-mark end-semester paper

    • Wind power plants
    • Components and classification of wind energy conversion systems
    • Tidal, wave and OTEC
    • Geothermal energy
    • MHD and thermionic generation
  6. Unit 6: Energy Conservation and Energy Audit

    5 hours

    The Energy Conservation Act 2001 and conservation in industry; the need for and types of energy audit; understanding energy costs and benchmarking; the Bureau of Energy Efficiency.

    Examined in the 70-mark end-semester paper

    • Energy Conservation Act
    • Types of energy audit
    • Energy audit methodology and instruments
    • Benchmarking and audit reports

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).