PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Heat Transfer

MECHPCC-11 · Semester VI · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Conduction

    5 hours

    Modes and basic laws of heat transfer, thermal conductivity; the general conduction equation in Cartesian coordinates and its Fourier, Laplace and Poisson forms; one-dimensional conduction through plane and composite walls; uniform heat generation in a wall.

    Examined in the 70-mark end-semester paper

    • Modes of heat transfer and their laws
    • General heat conduction equation
    • Steady conduction through plane walls
    • Thermal resistance networks and overall coefficient
    • Conduction with internal heat generation
  2. Unit 2: Cylinders, Spheres and Extended Surfaces

    6 hours

    One-dimensional conduction through cylinders and spheres; critical radius of insulation; heat generation in a cylinder; types of fin, the fin equation for long, insulated-tip and convective-tip fins, fin efficiency and effectiveness.

    Examined in the 70-mark end-semester paper

    • Conduction through cylinders and spheres
    • Critical radius of insulation
    • Heat transfer from fins
    • Fin efficiency and effectiveness
  3. Unit 3: Radiation

    4 hours

    Absorptivity, reflectivity and transmissivity; emissive power and emissivity; black and grey bodies; Kirchhoff's, Wien's and Planck's laws; Lambert's cosine law and intensity; exchange between two black surfaces.

    Examined in the 70-mark end-semester paper

    • Laws of thermal radiation
    • Radiation properties of surfaces
    • Radiation exchange between surfaces
  4. Unit 4: Convection

    6 hours

    Mechanism and types of convection; hydrodynamic and thermal boundary layers; local and average coefficients; dimensional analysis and dimensionless numbers for forced and natural convection.

    Examined in the 70-mark end-semester paper

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
  5. Unit 5: Boiling and Condensation

    3 hours

    Types of boiling, the pool boiling curve and forced boiling; film-wise and drop-wise condensation.

    Examined in the 70-mark end-semester paper

    • Boiling heat transfer
    • Condensation heat transfer
  6. Unit 6: Heat Exchangers

    6 hours

    Classification of heat exchangers, fouling factor and overall coefficient; LMTD and NTU analysis of parallel- and counter-flow exchangers; design considerations.

    Examined in the 70-mark end-semester paper

    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).