PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020
Finite Element Method
MECHPEC-03A · Programme Elective III · Semester VI · 4 credits · ISE 30 + ESE 70
One of the Programme Elective III options.
Unit 1: Introduction to FEM
6 hoursHistory and fundamentals of FEA; the general procedure; direct matrix formulation of uniaxial elements; FEM compared with FDM, BEM, FVM, exact solutions and experiment; types of element.
Examined in the 70-mark end-semester paper
- Finite element terminology and steps
- The stiffness (displacement) method
Unit 2: Model Validity, Solvers and Software
6 hoursModel validity, mesh design, refinement and element distortion; sub-modelling and sub-structuring; choosing solvers; pre-processors, solvers and post-processors in free and commercial packages.
Examined in the 70-mark end-semester paper
- Meshing, model validity and FEA software
- Higher-order elements: p- and h-refinement
Unit 3: One-Dimensional Elements
8 hoursTruss, bar, beam and thermal elements; interpolation and shape functions in global and natural coordinates; system equations for trusses and beams; stresses and strains.
Examined in the 70-mark end-semester paper
- Shape functions and their properties
- Bar and spring element stiffness matrices
- Truss and plane frame elements
- Beam element stiffness matrix
- Global, local and natural coordinates
- 1D steady-state conduction elements
Unit 4: Two-Dimensional Elements
8 hoursTriangles and quadrilaterals, the Pascal triangle; CST, LST and linear and parabolic quads; axisymmetric and shell elements; shape functions in global and natural coordinates.
Examined in the 70-mark end-semester paper
- Plane stress and plane strain
- Constant strain triangle
- Quadrilateral elements
- Isoparametric formulation
- Axisymmetric finite elements
Unit 5: Three-Dimensional Elements
6 hoursTetrahedral and brick elements, the Pascal tetrahedron, shape functions, system equations, stresses and strains (theory only).
Examined in the 70-mark end-semester paper
- Three-dimensional elements: tetrahedra and bricks
Unit 6: Nonlinear and Dynamic Analysis
6 hoursMaterial, geometric and boundary nonlinearity, contact and gaps; modal, transient, harmonic and spectrum analysis; transient thermal analysis; explicit analysis and fatigue (theory only).
Examined in the 70-mark end-semester paper
- Nonlinear and transient analysis in FEA
- Free vibration and the eigenvalue problem
- Lumped and consistent mass matrices
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).