PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
VLSI Design
ENTPEC-02A · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70
One of the Programme Elective II options.
Unit 1: Introduction to Verilog HDL
7 hoursThe Verilog module, operators, data types and styles of description; gate (inertial) and net (transport) delay models, time scales, module paths and path delays, inertial delay and pulse rejection.
Examined in the 70-mark end-semester paper
- Verilog modules, ports and instantiation
- Verilog operators
- Verilog data types and number representation
- Levels of abstraction in Verilog
- Gate-level modelling and delays
Unit 2: Combinational Logic using Behavioural Descriptions
7 hoursVariable assignment, sequential and loop statements; behavioural descriptions of adders, subtractors, comparators, multiplexers, demultiplexers, encoders and decoders.
Examined in the 70-mark end-semester paper
- Behavioural modelling: initial and always blocks
- if–else and case statements
- Timing control and loop statements in Verilog
- Combinational circuits in Verilog
Unit 3: Sequential Logic using Behavioural Descriptions
7 hoursBehavioural models of flip-flops, counters and shift registers; a state-machine sequence detector in Verilog.
Examined in the 70-mark end-semester paper
- Flip-flops with synchronous and asynchronous reset
- Counters and shift registers in Verilog
- Sequence detectors in Verilog
Unit 4: MOS Transistor Theory
7 hoursThe MOS structure, accumulation, depletion and inversion; device equations and second-order effects; static and dynamic behaviour of the CMOS inverter, power and energy-delay.
Examined in the 70-mark end-semester paper
- MOSFET operation and long-channel I–V characteristics
- MOSFET second-order effects
- CMOS inverter characteristics
- Power dissipation and power-delay product
Unit 5: Combinational Logic Design in CMOS
8 hoursStatic complementary CMOS and Boolean functions in CMOS; ratioed and pass-transistor logic; dynamic logic, its speed, power and design issues, cascading dynamic gates; static and dynamic designs compared; timing issues.
Examined in the 70-mark end-semester paper
- CMOS combinational logic design
- Ratioed logic and pseudo-NMOS gates
- Pass-transistor and dynamic CMOS logic: domino and zipper
- Charge sharing, fan-in and fan-out
Unit 6: Architecture of Commercial Devices
6 hoursCPLD architecture: Xilinx XC9500 and Altera MAX 7000; FPGA architecture: Altera FLEX 10K.
Examined in the 70-mark end-semester paper
- CPLD and FPGA architecture
- CLBs, LUTs, IOBs and interconnect
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).