PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Optical Communication
ENTPCC-12 · Semester VI · 3 credits · ISE 30 + ESE 70
Examined 70 + 30, with 25 marks of internal continuous assessment from at least eight assignments.
Unit 1: Introduction
5 hoursHistory, the general optical communication system, advantages and disadvantages; optical fibre waveguides, ray and mode theory; single-mode, multimode, step-index and graded-index fibres; numerical aperture, acceptance and critical angle and the number of modes.
Examined in the 70-mark end-semester paper
- Optical fiber communication link
- Ray and wave theory of propagation
- Numerical aperture and acceptance angle
- Modes and V-number
- Single-mode and dispersion-shifted fibers
Unit 2: Optical Fibre Losses and Joints
8 hoursIntrinsic and extrinsic absorption, linear and non-linear scattering and bending losses; intermodal and intramodal dispersion; fibre alignment and joint loss, splices, connectors and couplers.
Examined in the 70-mark end-semester paper
- Attenuation in optical fibers
- Dispersion in optical fibers
- Fiber fabrication, splices and connectors
- Optical couplers, isolators and circulators
Unit 3: Optical Sources
8 hoursRequirements of an optical source; the laser, optical emission from semiconductors, the double-heterojunction structure, injection laser structures and characteristics; LED structures and characteristics.
Examined in the 70-mark end-semester paper
- Laser diodes
- Light emitting diodes
- LED versus laser
Unit 4: Optical Detectors
8 hoursRequirements and principles of optical detection; absorption, quantum efficiency, responsivity and cut-off wavelength; PN, PIN and avalanche photodiodes and phototransistors.
Examined in the 70-mark end-semester paper
- PIN photodiode
- Avalanche photodiode
- Quantum efficiency and responsivity
- Phototransistors and opto-isolators
Unit 5: Optical Networks
5 hoursNetworking terminology and optical network modes; SONET/SDH, optical Ethernet, FDDI and data buses.
Examined in the 70-mark end-semester paper
- Optical network topologies
- SONET and SDH
- LAN technologies: Ethernet, Token Ring and FDDI
Unit 6: Fibre-Optic Communication Systems
8 hoursTransmitter and receiver design, the receiver noise-equivalent model, link design; WDM, DWDM and optical TDM.
Examined in the 70-mark end-semester paper
- Receiver noise and sensitivity
- Optical power budget
- Rise time budget
- Wavelength division multiplexing
- DWDM
- Optical time division multiplexing
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).