PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Microcontrollers and Applications
ENTPCC-09 · Semester V · 4 credits · ISE 30 + ESE 70
Unit 1: Introduction to Microcontrollers
4 hoursMicroprocessors and microcontrollers, CISC and RISC microcontrollers, Harvard and von Neumann architectures, the microcontroller software development cycle.
Examined in the 70-mark end-semester paper
- Microprocessors versus microcontrollers
- Von Neumann and Harvard, CISC and RISC architectures
Unit 2: The 8051 Architecture and Instructions
8 hours8051 hardware, addressing modes and instruction set, I/O pins, external memory, counters and timers, serial I/O and interrupts.
Examined in the 70-mark end-semester paper
- 8051 architecture and register set
- 8051 pin diagram and port structure
- 8051 memory organisation
- 8051 addressing modes and instruction set
- 8051 timers, counters and delay generation
- 8051 interrupts and serial communication
Unit 3: Programming the 8051
9 hoursAssembly and C programs for I/O ports, the serial port, timers and interrupts; interfacing switches, LEDs, relays, buzzers, LCDs, matrix keyboards and seven-segment displays.
Examined in the 70-mark end-semester paper
- 8051 assembly programming
- 8051 programming in C: data types, time delays and I/O
- 8051 interrupt priority and programming
- Interfacing LEDs, relays and buzzers with the 8051
- Interfacing LCD and seven-segment displays with the 8051
- Interfacing stepper motors, keyboards and DACs with the 8051
Unit 4: PIC16F877A Architecture and Features
9 hoursArchitecture, features and pins of the PIC16F877A; its registers, program and data memory, I/O ports, interrupts, resets, configuration word and instruction set.
Examined in the 70-mark end-semester paper
- PIC microcontroller and its families
- PIC16F877A architecture, memory and I/O ports
Unit 5: PIC16F877A Core Features
7 hoursTimers, capture/compare/PWM (CCP) modules, the internal ADC, the watchdog timer and the USART module.
Examined in the 70-mark end-semester paper
- PIC16F877A timers, CCP, ADC and USART
Unit 6: Arduino Interfacing for Various Sensors
5 hoursArduino and the Arduino IDE; interfacing an LED and ultrasonic, PIR, IR and temperature sensors.
Examined in the 70-mark end-semester paper
- Introduction to the Arduino family
- Development boards: Arduino and Raspberry Pi
- Interfacing sensors with Arduino: ultrasonic, PIR, IR and temperature
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).