PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Embedded System
ENTPEC-03A · Programme Elective III · Semester VI · 4 credits · ISE 30 + ESE 70
One of the Programme Elective III options.
Unit 1: Embedded System Introduction
5 hoursEmbedded systems, design challenges and common design metrics (time to market, NRE and unit cost, performance), applications and recent trends.
Examined in the 70-mark end-semester paper
- Embedded systems: classification and characteristics
- Design metrics and optimisation
Unit 2: System Architecture
8 hoursThe ARM7TDMI core, bus architecture and memory management; ARM7 operating modes and registers; the pipeline; ARM and Thumb instruction sets.
Examined in the 70-mark end-semester paper
- ARM7 architecture, operating modes and pipeline
- ARM and Thumb instruction sets
- ARM operating modes, registers, CPSR and SPSR
Unit 3: LPC2148 On-Chip Peripherals
8 hoursThe LPC2148 block diagram; I/O ports, PLL, timers/counters, interrupts, ADC, DAC, RTC, watchdog, PWM and UART.
Examined in the 70-mark end-semester paper
- LPC2148 features and architecture
- LPC2148 PLL, power control and VPB divider
- LPC2148 timers, watchdog, UART and I2C
- ADC and DAC on the LPC2148
- PWM on the LPC2148
- Watchdog timer and RTC
Unit 4: Interfacing and Programming
8 hoursEmbedded C for the on-chip peripherals (PLL, timers/counters, ADC, DAC); interfacing LEDs, buttons, seven-segment and LCD displays and a DC motor.
Examined in the 70-mark end-semester paper
- LPC2148 GPIO programming: LED, keypad and GLCD
- Interfacing seven-segment displays and stepper motors with the LPC2148
- Sensor and actuator interfacing
Unit 5: Real-Time Operating System
8 hoursRTOS versus a general OS, RTOS architecture, the scheduler, threads, processes and ISRs; semaphores, mailboxes, message queues, pipes, events and timers; memory management; introduction to µC/OS-II.
Examined in the 70-mark end-semester paper
- Real-time systems, tasks and threads
- RTOS scheduling algorithms
- Semaphores, mutexes and deadlock
- Inter-task communication
- µC/OS-II kernel structure
Unit 6: Case Studies
5 hoursCase studies such as a digital camera, a smart-card ATM and a mobile internet device.
Examined in the 70-mark end-semester paper
- Hardware–software co-design and the design life cycle
- Digital cameras and camcorders
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).