PAHSU TY E&TC syllabus

PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Digital Signal Processing

ENTPCC-08 · Semester V · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction to DSP Systems

    3 hours

    DSP and its industrial applications, basic elements and requirements of DSP, advantages over analog processing, correlation, the digital transfer function and stability.

    Examined in the 70-mark end-semester paper

    • Advantages of digital signal processing
    • DSP system elements and DSP processors
    • Correlation of discrete-time signals
    • Pole locations, causality and stability
  2. Unit 2: Discrete Fourier Transform

    6 hours

    Frequency-domain sampling and reconstruction of discrete-time signals; properties of the DFT and its relation to the Z-transform; computing the DFT and IDFT; the DFT as a linear transformation; circular convolution.

    Examined in the 70-mark end-semester paper

    • Discrete-time Fourier transform and frequency-domain sampling
    • Discrete Fourier transform
    • Properties of the DFT
    • Z-transform and its relation to Laplace and Fourier
    • Circular convolution and linear convolution via DFT
  3. Unit 3: Signal Filtering and Analysis

    6 hours

    Linear filtering with the DFT; filtering long sequences by the overlap-save and overlap-add methods; frequency analysis of signals with the DFT.

    Examined in the 70-mark end-semester paper

    • Overlap-add and overlap-save methods
  4. Unit 4: FFT Algorithm

    6 hours

    Radix-2 FFT algorithms for the DFT and IDFT: decimation in time and decimation in frequency.

    Examined in the 70-mark end-semester paper

    • Radix-2 DIT FFT
    • Radix-2 DIF FFT
  5. Unit 5: FIR Filter Design

    6 hours

    FIR filters, the Gibbs phenomenon, linear-phase conditions, phase and group delay; FIR design by the Fourier series method and with rectangular, triangular, Hanning, Hamming and Blackman windows.

    Examined in the 70-mark end-semester paper

    • Linear phase FIR filters
    • FIR design using windows
    • Dirichlet conditions and the Gibbs phenomenon
  6. Unit 6: IIR Filter Design

    6 hours

    Analog filter design and Butterworth characteristics; IIR design by impulse invariance and by the bilinear transformation, frequency warping (designs up to third order).

    Examined in the 70-mark end-semester paper

    • Butterworth filter design
    • IIR design by impulse invariance
    • Bilinear transformation and frequency warping
  7. Unit 7: Realization of DSP Systems

    6 hours

    Direct-form and cascade FIR structures; direct-form, cascade and parallel IIR structures; finite word-length effects in IIR design.

    Examined in the 70-mark end-semester paper

    • FIR filter realisation structures
    • IIR filter realisation structures
    • Finite word-length effects: quantisation errors and limit cycles
  8. Unit 8: DSP Applications

    3 hours

    DSP in audio processing, telecommunications, radar and biomedical signal processing.

    Examined in the 70-mark end-semester paper

    • DSP in biomedical and speech processing
    • DSP in wireless communication and IoT

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).