PAHSU · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Digital Logic Design
ENTPEC-01A · Programme Elective I · Semester V · 4 credits · ISE 30 + ESE 70
One of the Programme Elective I options.
Unit 1: Codes and Simplification Techniques
7 hoursStandard and canonical forms of logic functions, don't-care conditions, Karnaugh-map minimisation up to four variables, hazards and hazard-free circuits.
Examined in the 70-mark end-semester paper
- SOP and POS forms of logic functions
- K-map minimisation with don't-care conditions
- Static and dynamic hazards
Unit 2: Combinational Circuit Design
7 hoursHalf and full adders and subtractors; binary-Gray and BCD-to-seven-segment code converters, IC 7447; multiplexers and demultiplexers and their trees; encoders, decoders and the magnitude comparator.
Examined in the 70-mark end-semester paper
- Adders, subtractors and the look-ahead carry generator
- Code converters
- Multiplexers and multiplexer trees
- Demultiplexers and decoders
- Magnitude comparator
Unit 3: Logic Families and Flip-Flops
7 hoursLogic families and the characteristics of digital ICs; the NAND latch; D, SR, JK and T flip-flops with characteristic and excitation tables and equations; race-around and the master-slave JK; flip-flop conversion.
Examined in the 70-mark end-semester paper
- Characteristics of digital ICs
- Latches and the SR flip-flop
- JK, master–slave JK, D and T flip-flops
- Excitation tables and flip-flop conversion
Unit 4: Shift Registers
7 hoursSynchronous and asynchronous sequential circuits; shift-register modes, the 4-bit bidirectional and universal shift registers; ring and Johnson counters.
Examined in the 70-mark end-semester paper
- Registers and shift registers
- Ring and twisted-ring counters, sequence generators
Unit 5: Counters
7 hoursDesign of ripple counters, 4-bit up/down and mod-N counters with flip-flops; design of synchronous counters, 4-bit up/down and mod-N.
Examined in the 70-mark end-semester paper
- Ripple and mod-n counters
- Synchronous and up/down counters
Unit 6: State Machines
7 hoursMoore and Mealy machines, state diagrams, state assignment and reduction, implementation with flip-flops.
Examined in the 70-mark end-semester paper
- Moore and Mealy machines
- State diagrams, state tables and state reduction
- State assignment and FSM implementation
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).