PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Signals & Systems

EEPEC-03D · Programme Elective III · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective III options.

  1. Unit 1: Introduction to Signals and Systems

    7 hours

    Continuous-time, discrete-time and digital signals; unit step, impulse, exponential, sinusoidal, ramp and rectangular signals and the properties of the impulse; time shifting, reversal and scaling, amplitude scaling and the precedence rule; periodic, even and odd, causal and deterministic signals; energy and power signals.

    Examined in the 70-mark end-semester paper

    • Classification of signals and signal operations
    • Basic continuous and discrete signals
    • Singularity functions: impulse, step and ramp
  2. Unit 2: Introduction to Systems

    7 hours

    Classification of continuous- and discrete-time systems: lumped and distributed, static and dynamic, causal, linear, time-invariant, stable and invertible systems.

    Examined in the 70-mark end-semester paper

    • Properties of systems
  3. Unit 3: Linear Time-Invariant Systems

    6 hours

    Representing DT signals by impulses; impulse response; the convolution sum by graphical and analytical methods; the convolution integral and its properties; dynamicity, invertibility, causality, stability and step response of LTI systems.

    Examined in the 70-mark end-semester paper

    • Discrete-time convolution
    • Continuous-time convolution integral
    • LTI systems: causality, stability, impulse and step response
  4. Unit 4: Z Transform

    7 hours

    The Z-transform and region of convergence of finite and infinite sequences; properties of the ROC and the transform, initial and final value theorems; inverse Z-transform by power series, partial fractions and residues.

    Examined in the 70-mark end-semester paper

    • Z-transform and region of convergence
    • Properties of the Z-transform
    • Inverse Z-transform
  5. Unit 5: Fourier Transform

    7 hours

    Fourier series and the continuous-time Fourier transform, convergence, magnitude and phase spectra and properties; the DTFT, its relation to the Z-transform, existence and properties; Parseval's theorem.

    Examined in the 70-mark end-semester paper

    • Trigonometric and exponential Fourier series
    • Fourier transform and its properties
    • Introduction to DTFS and DTFT
    • Fourier transform and Z-transform
    • Parseval's theorem and power spectrum
  6. Unit 6: Discrete Fourier Transform

    7 hours

    4- and 8-point DFT and IDFT and their properties; linear convolution with the DFT; need for the FFT; 8-point decimation-in-time and decimation-in-frequency FFT.

    Examined in the 70-mark end-semester paper

    • Discrete Fourier transform and its use to estimate the Fourier transform
    • Decimation-in-time FFT
    • Decimation-in-frequency FFT

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).