PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Programmable Logic Control and SCADA

EEPEC-02C · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options. Units 4-6 cover SCADA; the syllabus also lists Control and Information Protocol (CIP) in Unit 6.

  1. Unit 1: Introduction to PLC

    7 hours

    Definition and history of the PLC; the overall PLC system: input and output modules, CPU, programmers and monitors, memory, processor and power supplies; advantages, disadvantages and selection criteria.

    Examined in the 70-mark end-semester paper

    • PLC definition and evolution
    • PLC hardware: CPU and I/O modules
    • PLC selection
  2. Unit 2: Programming of PLC

    6 hours

    Programming equipment; constructing ladder diagrams, their components and symbols; Boolean and relay logic and analysis of rungs; on/off and analog input and output devices; programming on/off inputs to produce on/off outputs.

    Examined in the 70-mark end-semester paper

    • Ladder diagram programming
    • Digital input devices
    • Analog input devices
    • Output devices and drives
    • Ladder logic applications
  3. Unit 3: Advanced PLC Function

    8 hours

    Analog PLC operation; PID control of continuous processes and closed-loop systems; PLC interfacing and an industrial process example; AC motor starters and overload protection, DC motor controllers and variable-frequency AC drives.

    Examined in the 70-mark end-semester paper

    • Analog and PID operations in PLCs
    • PID tuning
    • Motor control with PLCs
  4. Unit 4: SCADA Systems

    8 hours

    Definitions and basic architecture of SCADA: HMI, MTU and RTU; data transfer through PLCC; communication technologies and components; SCADA in electrical power systems; desirable properties, real-time systems, SCADA servers and functions.

    Examined in the 70-mark end-semester paper

    • SCADA architecture: HMI, MTU and RTU
    • SCADA communication and standard protocols
    • SCADA in power systems
  5. Unit 5: SCADA Architecture

    6 hours

    Monolithic, distributed and networked SCADA generations; intelligent electronic devices; operating interconnected power systems, automatic substation control, energy management, operating states, security and state estimation; SCADA security; SCADA in refineries, power generation, water purification and chemical plants.

    Examined in the 70-mark end-semester paper

    • Generations of SCADA
    • Energy control centres, SCADA and EMS
    • SCADA in critical infrastructure
  6. Unit 6: Evolution of SCADA Protocols

    7 hours

    The OSI model and its layers; TCP/IP; DNP3; IEC 61850 layered architecture; CIP, DeviceNet, ControlNet and EtherNet/IP; Foundation Fieldbus function blocks and Profibus; security implications of SCADA protocols.

    Examined in the 70-mark end-semester paper

    • OSI and TCP/IP models
    • Modbus and DNP3
    • IEC 61850
    • Profibus and industrial Ethernet
    • HART and Fieldbus protocols

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).