PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Power System Operation and Control

EEPEC-02A · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options.

  1. Unit 1: Economic Operation of Power System

    7 hours

    Optimal operation of thermal generators: heat rate, cost and input-output curves, incremental fuel and production costs; optimum generation allocation with and without line losses, loss coefficients and the penalty factor; hydrothermal scheduling.

    Examined in the 70-mark end-semester paper

    • Incremental cost curves
    • Economic dispatch by Lagrange multipliers
    • Penalty factor and B-coefficients
    • Hydro-thermal scheduling
  2. Unit 2: Unit Commitment

    7 hours

    Spinning reserve and thermal unit constraints; unit commitment by priority list, dynamic programming and Lagrange multipliers.

    Examined in the 70-mark end-semester paper

    • Unit commitment constraints
    • Unit commitment by priority list and dynamic programming
  3. Unit 3: Load Frequency Control

    7 hours

    Need for constant frequency; control areas; single-area and two-area load frequency control; the speed governing system.

    Examined in the 70-mark end-semester paper

    • Speed governing and turbine models
    • Load frequency control of an isolated system
    • Two-area load frequency control
  4. Unit 4: Reactive Power Control

    7 hours

    Reactive power compensation in transmission systems and the merits of each kind of compensating equipment; load compensation and the specification of a load compensator; uncompensated and compensated lines, shunt and series compensation.

    Examined in the 70-mark end-semester paper

    • Production and absorption of reactive power
    • Shunt reactors, series and shunt capacitors
    • Synchronous condensers and static VAR systems
    • Principles of series and shunt compensation
  5. Unit 5: Power System Security

    7 hours

    System state classification; security and contingency analysis; sensitivity factors; voltage stability.

    Examined in the 70-mark end-semester paper

    • Power system security and contingency analysis
    • Preventive and emergency control
  6. Unit 6: Voltage Stability

    7 hours

    Angle versus voltage stability; reactive power flow and voltage collapse; formulating and analysing the voltage stability problem; preventing voltage collapse; trends and challenges.

    Examined in the 70-mark end-semester paper

    • PV and QV curves
    • Voltage collapse
    • Voltage stability analysis and indices

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).