PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Linear Control System

EEPCC-09 · Semester V · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction to Control System

    6 hours

    Components and classification of control systems; open- and closed-loop systems with examples; positive and negative feedback; transfer functions of open- and closed-loop systems; sensitivity and the effect of feedback on it; AI in control systems.

    Examined in the 70-mark end-semester paper

    • Open-loop and closed-loop systems
    • Transfer function, poles and zeros
    • Effect of feedback on sensitivity
  2. Unit 2: Mathematical Models of Physical Systems

    7 hours

    Transfer functions of electrical and translational and rotational mechanical systems; force-voltage and force-current analogies; transfer functions of AC and DC servomotors.

    Examined in the 70-mark end-semester paper

    • Modelling electrical and mechanical systems
    • Electrical-mechanical analogies
    • AC servo motors
    • PMDC and DC servo motors
  3. Unit 3: Reduction of Multiple Systems

    8 hours

    Block diagram representation and reduction of multiple systems; signal flow graphs and Mason's gain formula; converting block diagrams to signal flow graphs.

    Examined in the 70-mark end-semester paper

    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
  4. Unit 4: Time-Response Analysis

    7 hours

    Standard test signals; poles, zeros and system response; response of first- and second-order systems; transient response specifications; steady-state errors and the error constants Kp, Kv and Ka; P, PI, PD and PID controllers.

    Examined in the 70-mark end-semester paper

    • Standard test signals
    • Response of first-order systems
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
    • P, PI and PID controllers
  5. Unit 5: Stability and Root Locus Techniques

    7 hours

    Stability and its necessary condition; the Routh-Hurwitz criterion and special cases; root locations in the s-plane; rules for constructing the root locus and judging stability from it.

    Examined in the 70-mark end-semester paper

    • Stability and pole locations
    • Routh-Hurwitz criterion
    • Root locus construction
    • Stability from the root locus
  6. Unit 6: Frequency Response Analysis

    7 hours

    Frequency-domain specifications and their correlation with the time domain; polar and Bode plots; minimum-phase functions; gain and phase margins and stability from the Bode plot.

    Examined in the 70-mark end-semester paper

    • Frequency-domain specifications
    • Polar plots
    • Bode plots
    • Gain margin and phase margin

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).