PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Hybrid Electrical Vehicle Design

EEPEC-01C · Programme Elective I · Semester V · 4 credits · ISE 30 + ESE 70

One of the Programme Elective I options.

  1. Unit 1: Introduction to Electric Vehicles

    7 hours

    History and components of electric vehicles; comparison with internal combustion engine vehicles, benefits and challenges; EV classification, electrification levels and terminology.

    Examined in the 70-mark end-semester paper

    • History of electric vehicles
    • Components of an electric vehicle
    • EVs versus IC engine vehicles
  2. Unit 2: Motor Torque Calculations for Electric Vehicle

    7 hours

    Rolling resistance, grade resistance and acceleration force; total tractive effort and the torque required at the drive wheel.

    Examined in the 70-mark end-semester paper

    • Driving resistances
    • Forces acting on a vehicle
    • Power and torque requirements
  3. Unit 3: Electric Vehicle Architecture Design

    7 hours

    Types of EVs and their components; electrical protection and system requirements; BEV, HEV, PHEV and FCEV; electrification levels; comparison of fuel, electric and solar power; solar PV-based EV design.

    Examined in the 70-mark end-semester paper

    • BEV, HEV, PHEV and FCEV
    • Electric drive-train topologies
    • Solar-powered electric vehicles
  4. Unit 4: Electric Drive and Controller

    7 hours

    Types, selection and sizing of motors; RPM and torque calculation; sizing motor controller components; physical location and mechanical and electrical connection of the motor.

    Examined in the 70-mark end-semester paper

    • Motors for electric vehicles
    • Sizing the motor and converter
    • Power electronics in EV drives
  5. Unit 5: Energy Storage Solutions

    7 hours

    Lead-acid, lithium and NiMH cells; battery charging and discharging calculations; cell selection and sizing; battery layout, pack configuration and construction; battery selection criteria.

    Examined in the 70-mark end-semester paper

    • Battery technologies for EVs
    • Battery performance parameters
    • Battery pack design
    • Range and battery sizing
  6. Unit 6: Battery and Energy Management System

    7 hours

    Need for a BMS; rule-based and optimisation-based control; high-level supervisory control in software; power modes and motor behaviour; advanced features and AI in electric vehicles.

    Examined in the 70-mark end-semester paper

    • Battery management systems
    • Energy management strategies for EVs
    • AI and digital twins in EVs

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).