PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020
Energy Storage System
EEPEC-03C · Programme Elective III · Semester VI · 4 credits · ISE 30 + ESE 70
One of the Programme Elective III options.
Unit 1: Introduction to Energy Storage in Power Systems
6 hoursNeed and role of storage in power systems; types and classification; energy and power balance in a storage unit; modelling the power transformation system, central store and charge-discharge control system; econometric considerations.
Examined in the 70-mark end-semester paper
- Need for energy storage
- Types of energy storage
- Energy and power density, efficiency and LCOS
Unit 2: Thermal and Mechanical Energy Storage Technologies
8 hoursThermal storage media, containment and storage in power plants; pumped hydro and compressed air; flywheels; power-to-gas: hydrogen and synthetic methane.
Examined in the 70-mark end-semester paper
- Sensible, latent and thermochemical heat storage
- Pumped hydro, compressed air and flywheel storage
- Hydrogen production and storage
Unit 3: Electrochemical and Electrical Storage Systems
8 hoursLead-acid, Li-ion and flow batteries; SoC, DoD, C-rate, specific energy and specific power; fuel cells; supercapacitors and SMES; comparison and environmental impact.
Examined in the 70-mark end-semester paper
- Lead-acid, lithium-ion and sodium-ion batteries
- SOC and depth of discharge
- Flow batteries and supercapacitors
- Comparison of storage systems
Unit 4: Electrochemical Energy Storage Technologies
8 hoursBattery parameters with numerical examples; fuel cells, supercapacitors and SMES; comparison and environmental impacts; storage in isolated and in grid-connected renewable systems.
Examined in the 70-mark end-semester paper
- Charging and discharging characteristics
- Battery modelling, degradation and recycling
- Pumped, SMES and compressed air storage
Unit 5: Integration with Renewable Energy Sources
6 hoursThe role of storage in solar, wind, hydro, tidal and wave systems; isolated versus grid-connected renewables; storage's effect on power quality, stability and reliability.
Examined in the 70-mark end-semester paper
- Grid-connected solar PV
- Grid-connected wind systems
- Power quality in renewable systems
Unit 6: Energy Storage Applications
8 hoursSmart grids, microgrids and smart houses; mobile storage in EVs, G2V and V2G; management and control hierarchy; aggregating storage and distributed generation in virtual power plants; battery SCADA; hybrid storage configurations and applications.
Examined in the 70-mark end-semester paper
- Microgrids
- EV charging and V2G
- Energy management systems
- Hybrid energy storage systems
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).