PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020
Electric Traction & Utilization
EEPCC-10 · Semester VI · 2 credits · ISE 30 + ESE 70
2 credits, 2 lectures a week, with no lab.
Unit 1: Traction Systems
6 hoursSystems of electric traction; trapezoidal and quadrilateral speed-time curves; tractive effort; specific energy consumption and the factors affecting it; dead, accelerating and adhesive weight; metro and monorail systems; AI in traction.
Examined in the 70-mark end-semester paper
- Ideal traction system and traction systems
- Speed-time curves and train movement
- Tractive effort, energy output and consumption
- Schedule speed and train resistance
Unit 2: Control of Traction Motors and Train Lighting
6 hoursDesirable characteristics of traction motors and the suitability of the DC series motor; series-parallel control, shunt and bridge transition; electrical and regenerative braking; control and auxiliary equipment.
Examined in the 70-mark end-semester paper
- DC series motors for traction
- Traction motor control: series-parallel and multiple unit control
- Speed control and electric braking in traction
- Regenerative braking and energy saved
Unit 3: Selection of Motors for Industrial Applications
4 hoursMotor selection for textile industries, machine tools, rolling mills, sugar mills, cranes and lifts.
Examined in the 70-mark end-semester paper
- Matching motors to mechanical loads
- Motor applications in mills, mines, cranes and lifts
Unit 4: Electric Heating and Welding
6 hoursTypes, advantages, disadvantages and applications of electric heating and of electric welding; AI in utilisation.
Examined in the 70-mark end-semester paper
- Resistance heating and oven design
- Arc and induction furnaces
- Dielectric heating
- Arc and resistance welding
Unit 5: Illumination
5 hoursTerms used in illumination; factors in designing a lighting scheme; light sources, discharge lamps, mercury and sodium vapour lamps; tungsten filament lamps versus fluorescent tubes.
Examined in the 70-mark end-semester paper
- Photometric quantities and measurement
- Requirements of good lighting
- Gas discharge lamps
- Sodium vapour and metal halide lamps
- Fluorescent lamps and CFLs
Unit 6: Energy Conservation
3 hoursMotivation and principles of energy conservation; energy conservation planning; energy conservation in industries.
Examined in the 70-mark end-semester paper
- Principles of energy management
- Planning and monitoring energy conservation projects
- Energy inputs and uses in industry
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).