PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020
Advanced Microcontroller Systems
EEPEC-01A · Programme Elective I · Semester V · 4 credits · ISE 30 + ESE 70
One of the Programme Elective I options.
Unit 1: Combinational Logic Circuits
6 hoursSOP and POS forms; Karnaugh maps for three and four variables and minimisation, minterms, maxterms and don't-care conditions; multiplexers and demultiplexers; half and full adders.
Examined in the 70-mark end-semester paper
- SOP and POS reduction
- Karnaugh maps
- Multiplexers and demultiplexers
- Half and full adders
Unit 2: Sequential Logic Circuits
8 hoursSR, JK, D and T flip-flops with truth tables and characteristic equations; shift registers, their modes and the ring counter; ripple and up/down counters; synchronous counters with T and JK flip-flops; modulus of a counter.
Examined in the 70-mark end-semester paper
- Latches and flip-flops
- Shift registers
- Ring and twisted-ring counters
- Asynchronous counters
- Synchronous counter design
- Up-down and mod-N counters
Unit 3: 8051 Microcontroller Architecture
7 hoursFeatures, architecture, pin diagram and alternate pin functions of the 8051 and its reset circuit; address, data and control buses and demultiplexing; RAM, ROM, PROM, EPROM, EEPROM and flash; internal and external memory organisation; SFRs for ports, serial port, timers and interrupts.
Examined in the 70-mark end-semester paper
- 8051 architecture
- Demultiplexing of buses and control signals
- Semiconductor memories: RAM, ROM and flash
- 8051 memory organisation
- 8051 ports and power control
Unit 4: Instruction Set and Programming of 8051
7 hoursAddressing modes and instruction set; IDEs, simulators, debuggers, cross-compilers and in-circuit emulators; C data types; programming in assembly and C.
Examined in the 70-mark end-semester paper
- 8051 addressing modes and instruction set
- 8051 Boolean processing and simple programs
- 8051 development tools and programming in C
Unit 5: 8051 Interfacing
8 hoursAddress decoding and interfacing external program and data memory; relay and opto-isolator interfaces; seven-segment LED, 16x2 LCD and matrix keyboard interfaces; ADC 0809 and DAC 0808 interfacing.
Examined in the 70-mark end-semester paper
- 8051 interfacing and applications
- Keyboard and LED display interfacing
- LCD interfacing
- Actuators, displays, opto-isolators and relays
- ADC interfacing
Unit 6: Applications of Microcontrollers
6 hoursTemperature measurement with the LM35; DC motor, stepper motor and servo motor speed control; fault detection in motors.
Examined in the 70-mark end-semester paper
- Sensor interfacing: LM35, ACS712 and ZMPT101B
- Microprocessor applications in measurement and control
- Motor control with the 8051
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).