PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Advanced Control System

EEPCC-12 · Semester VI · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Design of Compensator Using Root Locus

    6 hours

    The design problem and preliminary considerations; realising basic compensators with passive and active networks; lead, lag and lag-lead compensator design by root locus.

    Examined in the 70-mark end-semester paper

    • Cascade compensation
    • Lead and lag networks
    • Root locus design of lead and lag compensators
  2. Unit 2: Design of Compensator Using Frequency Response

    5 hours

    Lag, lead and lag-lead compensation using the Bode plot.

    Examined in the 70-mark end-semester paper

    • Lead compensator design using Bode plot
    • Lag compensator design using Bode plot
    • Lag-lead compensation
  3. Unit 3: Non-linear Control Systems

    4 hours

    Common nonlinearities; the phase plane method and singular points; stability of nonlinear systems.

    Examined in the 70-mark end-semester paper

    • Common nonlinearities
    • Phase plane method and singular points
    • Behaviour of nonlinear systems
  4. Unit 4: State-Space Analysis and Design

    8 hours

    State, state variables and the state model; state-space models of electrical and mechanical systems from transfer functions; the state transition matrix and its properties; controllability and observability; pole placement by transformation matrix, direct substitution and Ackermann's formula; full-state observers and their effect on the closed loop.

    Examined in the 70-mark end-semester paper

    • State-space representation
    • Transfer function and state-space conversion
    • State transition matrix
    • Controllability and observability
    • Pole placement and Ackermann's formula
    • Full-order state observer
  5. Unit 5: Discrete-time Control System

    7 hours

    Elements and advantages of discrete-data control systems; pulse transfer functions of cascaded elements, closed loops and digital controllers; mapping between the s- and z-planes; stability in the z-plane by Jury's test.

    Examined in the 70-mark end-semester paper

    • Sampling and the zero-order hold
    • Pulse transfer function and Z-transform
    • Mapping between s-plane and z-plane
    • Jury stability test and bilinear transformation

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).