PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020
Water and Sanitation Infrastructure
CIVPEC-01C · Elective I · Semester V · 4 credits · ISE 30 + ESE 70
One of the Elective I options.
Unit 1: Introduction to Water and Sanitation Infrastructure
5 hoursImportance of water and sanitation, global and regional access challenges, and the Sustainable Development Goals.
Examined in the 70-mark end-semester paper
- Government water and sanitation missions
- Sustainability and the SDGs
Unit 2: Conveyance of Water
6 hoursSources and intakes, design of a river intake and jack well, pumping systems and pump power; gravity and pressure mains, pipe materials (ductile iron, mild steel, plastic), joints, laying and hydraulic testing; break-pressure tanks, forces on mains, economic design of a rising main and thrust blocks.
Examined in the 70-mark end-semester paper
- Intake structures
- Rising and gravity mains
- Economical diameter of rising main
- Pipe materials and jointing
Unit 3: Water Treatment Infrastructure
6 hoursDesign of cascade aerators; ideal settling and design of horizontal and vertical sedimentation tanks; design of rapid mixers and of hydraulic and mechanical flocculators with the velocity gradient G; design of slow and rapid sand filters, backwashing and underdrains; hardness and lime-soda softening.
Examined in the 70-mark end-semester paper
- Aeration
- Sedimentation and settling tanks
- Design of flash mixers and flocculators
- Rapid sand filters
- Slow sand and pressure filters
- Softening and desalination
Unit 4: Design of Sewerage Systems and Appurtenances
9 hoursAssumptions and data for sewer design, maximum and self-cleansing velocities, egg-shaped sewers, storm-water drainage, ventilation, maintenance and cleaning of sewers.
Examined in the 70-mark end-semester paper
- Design of sewers
- Quantity of sewage and storm water
- Sewer construction, appurtenances and maintenance
Unit 5: Design of Sewage Treatment Plants
9 hoursDesign of screens and grit chambers and Stokes' law; conventional and high-rate trickling filters and their efficiency; sedimentation and sludge digestion tanks; design considerations for the activated sludge process, septic tanks and oxidation ponds.
Examined in the 70-mark end-semester paper
- Screens and grit chambers
- Trickling filters
- Primary sedimentation tanks
- Sludge thickening and conditioning
- Design of the activated sludge process
- Design of a septic tank
- Oxidation ponds and sludge disposal
Unit 6: Maintenance of Water Supply and Sanitation Systems
6 hoursOperation and maintenance of conveyance and distribution systems, corrosion and its control; smart metering and real-time monitoring of water quality and pressure; causes, detection and control of leakage; the Water (Prevention and Control of Pollution) Act; maintenance of sewerage, sewage and sludge pumping and pumping-station design.
Examined in the 70-mark end-semester paper
- Water distribution systems
- Leak detection
- Water pollution: sources and kinetics
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).