PAHSU TY Civil syllabus

PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020

Transportation Engineering

CIVPCC-08 · Semester V · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction, Highway Planning and Alignment

    7 hours

    Modes of transport, their importance and limitations; principles of highway planning, road development in India, classification of roads and road patterns; requirements of highway alignment and engineering surveys.

    Examined in the 70-mark end-semester paper

    • Modes of transportation
    • Road development plans in India
    • Classification of roads and road patterns
    • Highway alignment
  2. Unit 2: Highway Geometric Design and Materials

    8 hours

    Cross-section elements, carriageway and camber; stopping and overtaking sight distances, superelevation, extra widening and transition curves; subgrade and pavement materials, CBR and plate load tests, tests on aggregates and bituminous materials; geosynthetics in road construction.

    Examined in the 70-mark end-semester paper

    • Highway cross-section elements
    • Sight distance
    • Design of horizontal alignment
    • Subgrade soil and CBR test
    • Tests on road aggregates
    • Bituminous binders and modified bitumen
    • Functions of geosynthetics
  3. Unit 3: Pavement Design, Construction and Drainage

    8 hours

    Types of pavement; flexible pavement design by the IRC 37-2018 method; wheel-load and temperature stresses in rigid pavements and joints; construction, specifications and quality control of bituminous and cement concrete pavements; pavement failures and functional and structural evaluation; surface and subsurface highway drainage.

    Examined in the 70-mark end-semester paper

    • Flexible and rigid pavements
    • Flexible pavement design to IRC 37
    • Stresses in rigid pavements
    • Joints in concrete pavements
    • Construction of flexible and rigid pavements
    • Pavement evaluation and maintenance
    • Highway drainage
  4. Unit 4: Railway Engineering

    8 hours

    Indian Railways and the components of the track; wheels and axles, coning of wheels, train resistances, hauling capacity and tractive effort; rail sections, creep, wear and rail failures, sleepers, fixtures and fastenings, track cross-sections and drainage; alignment, horizontal curves, superelevation, cant deficiency and grade compensation; turnouts, design of a simple turnout and track junctions.

    Examined in the 70-mark end-semester paper

    • Permanent way and its components
    • Coning of wheels and creep of rails
    • Train resistances, tractive effort and hauling capacity
    • Geometric design of railway track
    • Points, crossings and turnouts
  5. Unit 5: Airport Engineering

    7 hours

    Airports in India, aircraft characteristics, airport planning and site selection, obstructions, zoning laws and imaginary surfaces; airport layout, runway elements, orientation and configuration, basic runway length and ICAO/FAA corrections, exit taxiways, holding aprons, terminal buildings, gate positions, marking and lighting.

    Examined in the 70-mark end-semester paper

    • Aircraft characteristics
    • Airport planning and runway orientation
    • Airport zoning and obstructions
    • Runway length and geometric design of runways
    • Taxiways, aprons and airport drainage
    • Terminal buildings and aprons
    • Airport marking and lighting
  6. Unit 6: Docks, Harbours and Tunnels

    7 hours

    Ports and their requirements, classification of harbours, docks, breakwaters, transit sheds and navigation aids; size and shape of tunnels, tunnelling in soil, soft and hard rock, lining, drainage and ventilation.

    Examined in the 70-mark end-semester paper

    • Docks and harbours: types and planning
    • Breakwaters
    • Port operations and berthing facilities
    • Tunnelling: methods, lining, drainage and ventilation

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).