PAHSU TY Civil syllabus

PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020

Hydrology and Water Resource Engineering

CIVPCC-11 · Semester VI · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction to Hydrology

    7 hours

    The hydrological cycle; forms and measurement of precipitation, correcting and estimating missing data, rain gauge networks, average precipitation over a catchment, mass curves, intensity-duration curves and depth-area-duration analysis; evaporation and its control on reservoirs, evapotranspiration; infiltration and its indices.

    Examined in the 70-mark end-semester paper

    • Hydrological cycle
    • Precipitation and rain gauges
    • Mean areal precipitation
    • Depth-area-duration and IDF curves
    • Evaporation and evapotranspiration
    • Infiltration and infiltration indices
  2. Unit 2: Rainfall-Runoff and Stream Gauging

    10 hours

    Factors affecting runoff, catchment yield and rainfall-runoff relations; hydrograph components and base flow separation; unit hydrograph theory, derivation and use, the S-curve; site selection and discharge measurement by area-velocity, slope-area and modern methods; peak flow by the rational and other methods, design flood and recurrence interval.

    Examined in the 70-mark end-semester paper

    • Runoff and its estimation
    • Hydrographs and base flow separation
    • Unit hydrograph and S-curve
    • Stream gauging
    • Flood estimation and frequency analysis
  3. Unit 3: Groundwater Hydrology

    5 hours

    Occurrence of groundwater, specific yield, Darcy's law and permeability, safe yield; steady flow to wells in confined and unconfined aquifers, specific capacity; design and construction of open and tube wells.

    Examined in the 70-mark end-semester paper

    • Aquifers and their properties
    • Well hydraulics
    • Design of tube wells: screens and gravel packs
  4. Unit 4: Irrigation

    7 hours

    Flow, lift, inundation and storage irrigation and their sources; sprinkler, drip, basin and furrow application, layout of a drip system; components of a lift irrigation scheme; percolation tanks, bandharas and Kolhapur-type weirs.

    Examined in the 70-mark end-semester paper

    • Methods of irrigation
    • Design of drip irrigation systems
    • Lift irrigation schemes
    • Minor irrigation: percolation tanks, bandharas and KT weirs
  5. Unit 5: Soil and Crop Water Requirements

    7 hours

    Soils and their suitability for crops, soil moisture and the wilting coefficient; water requirements of crops, duty and delta and the factors affecting them; crop seasons of Maharashtra and India; gross, culturable and irrigable command areas; reservoir capacity.

    Examined in the 70-mark end-semester paper

    • Soil-water relationships
    • Crop water requirement and consumptive use
    • Duty, delta and irrigation efficiencies
    • Reservoir capacity by mass curve
  6. Unit 6: Water Management

    6 hours

    Watershed management, soil and water conservation, rainwater and groundwater harvesting; canal water management and distribution, water users' cooperatives, canal revenue and warabandi; remote sensing and GIS in water resources.

    Examined in the 70-mark end-semester paper

    • Watershed management and delineation
    • Groundwater recharge methods
    • Rainwater harvesting
    • Water distribution: warabandi and participatory management
    • Water charges and cropping patterns
    • Remote sensing and GIS in water management

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).