PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020
Geotechnical Engineering
CIVPCC-09 · Semester V · 4 credits · ISE 30 + ESE 70
Unit 1: Index Properties and Classification of Soil
8 hoursFormation and types of soil and the three-phase system; void ratio, porosity, degree of saturation, air content, densities and their inter-relations; field density by sand replacement and core cutter; specific gravity, density index and Atterberg limits; grain size analysis by sieving and sedimentation; IS 1498 classification.
Examined in the 70-mark end-semester paper
- Soil formation, structure and clay minerals
- Three-phase system and weight–volume relationships
- Field density by sand replacement and core cutter
- Index properties of soil
- Particle size analysis: sieve and sedimentation
- Soil classification systems
Unit 2: Flow of Water Through Soil
9 hoursHead, gradient and potential, Darcy's law and its validity, factors affecting permeability, laboratory and field permeability tests; seepage pressure, quicksand and critical hydraulic gradient; Laplace's equation, construction and use of flow nets; piping.
Examined in the 70-mark end-semester paper
- Darcy's law and permeability
- Permeability tests in the laboratory and field
- Seepage pressure and quicksand
- Laplace equation for 2-D flow
- Flow nets and seepage discharge
- Filter design and piping
Unit 3: Shear Strength
7 hoursCoulomb's theory and the failure envelope; total and effective stress approaches and pore pressure, Mohr's circle for cohesive and cohesionless soils; UU, CU and CD tests and their choice; box shear, triaxial (with pore pressure and volume change), unconfined compression and vane shear tests; sensitivity and thixotropy.
Examined in the 70-mark end-semester paper
- Mohr–Coulomb failure theory
- Effective stress principle
- Direct shear test
- Triaxial test and drainage conditions
- Unconfined compression and vane shear tests
- Sensitivity and thixotropy
Unit 4: Compaction and Stress Distribution
7 hoursTheory of compaction and influencing factors, standard and modified Proctor tests, field compaction methods, equipment and control; total, neutral and intergranular stress; Boussinesq's equation for point loads, uniformly loaded circular and rectangular areas, pressure bulbs and Newmark's chart; contact pressure under rigid footings.
Examined in the 70-mark end-semester paper
- Compaction and Proctor tests
- Field compaction and its control
- Boussinesq's theory
- Pressure bulb
- Newmark's influence chart
Unit 5: Compressibility and Consolidation
7 hoursCompressibility of laterally confined soil, compression of sand and clay, e-p and e-log p curves and the compression index; Terzaghi's one-dimensional consolidation theory and its field relevance; the consolidation test and the coefficient of consolidation.
Examined in the 70-mark end-semester paper
- Compressibility: e–p and e–log p curves
- Terzaghi's one-dimensional consolidation
- Consolidation test
Unit 6: Earth Pressure Theories
7 hoursEarth pressure at rest, active and passive; Rankine's and Coulomb's theories; trial wedge, Culmann's and Rebhann's graphical methods; critical depth of an open cut in cohesive soil.
Examined in the 70-mark end-semester paper
- Earth pressure at rest and plastic equilibrium
- Rankine's earth pressure theory
- Coulomb's wedge theory
- Rebhann's, Poncelet's and Culmann's graphical methods
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).