PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020
Foundation Engineering
CIVPEC-02A · Elective II · Semester VI · 4 credits · ISE 30 + ESE 70
One of the Elective II options.
Unit 1: Soil Exploration
6 hoursRequirements of satisfactory foundations; planning exploration; augers, wash boring and rotary drilling; disturbed and undisturbed sampling; rock drilling, core barrels, core recovery and RQD.
Examined in the 70-mark end-semester paper
- Planning subsurface exploration
- Boring, sampling and samplers
- Rock drilling and core recovery
Unit 2: Bearing Capacity and Settlement
8 hoursUltimate, safe and allowable bearing capacity and modes of failure; Terzaghi's equation and the IS 6403 method; effect of water table and eccentricity; plate load, SPT and pressuremeter tests; immediate settlement to IS 8009, consolidation, total, differential and tolerable settlement and angular distortion.
Examined in the 70-mark end-semester paper
- Modes of shear failure
- Terzaghi's bearing capacity theory
- Meyerhof, Hansen, Vesic and IS methods
- Layered soils, water table and eccentricity
- Plate load test
- SPT and its corrections
- Cone penetration and pressuremeter tests
- Immediate settlement
- Allowable and differential settlement
Unit 3: Shallow Foundations
8 hoursIsolated, combined and strap footings (rigid analysis), raft foundations by the conventional method and floating foundations (geotechnical design only).
Examined in the 70-mark end-semester paper
- Proportioning of combined and strap footings
- Raft foundations
- Floating foundations
Unit 4: Piles, Caissons and Sheet Piles
8 hoursClassification of piles, static capacity of cast-in-situ piles in cohesive, cohesionless and mixed soils, dynamic formulae and negative skin friction; under-reamed piles; pile groups, spacing and efficiency; box, pneumatic and open (well) caissons, grip length, sinking and its difficulties; cantilever sheet piles in cohesionless and cohesive soils.
Examined in the 70-mark end-semester paper
- Classification and installation of piles
- Static capacity of piles
- Dynamic pile formulae
- Pile groups and negative skin friction
- Under-reamed piles
- Piers and caissons
- Well foundations: components and sinking
- Cantilever and anchored sheet piles
Unit 5: Stability of Slopes
8 hoursStability of finite slopes: Swedish slip circle, method of slices and friction circle; Fellenius' construction for the critical slip circle; stability number.
Examined in the 70-mark end-semester paper
- Factors of safety and types of slope failure
- Stability of finite slopes: slip circle method
Unit 6: Cofferdams, Problem Soils and Ground Improvement
8 hoursTypes of cofferdam and stability of cellular cofferdams; weak, compressible, expansive, collapsible and corrosive soils; precompression, sand drains, vibroflotation, grouting and soil reinforcement; foundations on fills and contaminated soils; geotextiles and their applications.
Examined in the 70-mark end-semester paper
- Cofferdams
- Foundations on expansive soils
- Preloading and sand drains
- Vibroflotation and vibro-replacement
- Applications of grouting
- Types of geosynthetics
- Functions of geosynthetics
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).