PAHSU TY Civil syllabus

PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020

Earthquake Engineering

CIVPEC-03C · Elective III · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Elective III options. The syllabus prints seven units, four in Section I and three in Section II.

  1. Unit 1: Elements of Seismology

    3 hours

    Effects of earthquakes, the earth's structure, causes and plate tectonics; seismic waves, magnitude, intensity and energy; seismographs, strong motion and accelerograms; liquefaction; major Indian earthquakes.

    Examined in the 70-mark end-semester paper

    • Causes of earthquakes and seismic waves
    • Plate tectonics and elastic rebound theory
    • Magnitude and intensity
    • Soil liquefaction and seismic slope stability
  2. Unit 2: Free Vibration of SDOF Systems

    5 hours

    Dynamic loads and analysis, degrees of freedom; undamped and viscously damped free vibration, equations of motion and the logarithmic decrement.

    Examined in the 70-mark end-semester paper

    • Static and dynamic loads
    • Modelling SDOF systems
    • Free vibration of SDOF systems
    • Damping and its types
  3. Unit 3: Forced Vibration of SDOF Systems

    5 hours

    Harmonic loading of undamped and damped SDOF systems; force transmitted to the foundation and transmissibility; response to harmonic support excitation.

    Examined in the 70-mark end-semester paper

    • Forced vibration of SDOF systems
    • Response to ground motion
  4. Unit 4: Response Spectrum Theory

    3 hours

    Response to general dynamic loading, Duhamel's integral and rectangular loading; the earthquake response spectrum, tripartite spectrum and design response spectrum.

    Examined in the 70-mark end-semester paper

    • Duhamel's integral
    • Ground motion parameters and spectra
  5. Unit 5: Principles of Earthquake-Resistant Design

    5 hours

    Planning for symmetry, simplicity and regularity; resistance of elements and structures to dynamic load, strength and deflection criteria.

    Examined in the 70-mark end-semester paper

    • Building configuration and torsion
    • Earthquake-resistant planning and construction features
  6. Unit 6: Evaluation of Seismic Forces

    5 hours

    Philosophy of earthquake-resistant design and IS 1893 provisions, soft storeys, the IS 1893 design spectrum and lateral loads on multi-storey buildings; ductility, its measures and influencing factors, energy absorption and IS 13920.

    Examined in the 70-mark end-semester paper

    • IS 1893 provisions
    • Equivalent static analysis
    • Soft storey and capacity design
    • Ductility and ductile detailing
  7. Unit 7: Earthquake-Resistant Construction

    4 hours

    Failure mechanisms of masonry; construction aspects of masonry and timber buildings; retrofitting and strengthening of low-cost, low-rise buildings; IS 4326 and IS 13935.

    Examined in the 70-mark end-semester paper

    • Seismic design of masonry to IS 4326
    • Seismic retrofitting of RC buildings

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).