PAHSU TY Civil syllabus

PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020

Design of Concrete Structures-I

CIVPCC-10 · Semester VI · 3 credits · ISE 30 + ESE 70

Only IS 456-2000 is allowed in the university exam; all design is by the limit state method.

  1. Unit 1: Limit State of Collapse: Flexure, Shear and Bond

    8 hours

    Design philosophies, types of limit states, characteristic strength and load, load and partial safety factors; serviceability and deflection; analysis and design of singly and doubly reinforced rectangular sections.

    Examined in the 70-mark end-semester paper

    • Working stress and limit state methods
    • Characteristic loads, strengths and partial safety factors
    • Serviceability checks for deflection and cracking
    • Singly reinforced rectangular sections
    • Doubly reinforced sections
  2. Unit 2: Design of Slabs

    7 hours

    One-way, two-way and cantilever slabs by the limit state method to IS 456.

    Examined in the 70-mark end-semester paper

    • One-way slabs
    • Two-way slabs
    • Cantilever and continuous slabs
  3. Unit 3: Design of Stairs

    7 hours

    Types of stairs; simply supported and dog-legged stairs; open-well stairs with a solid waist slab.

    Examined in the 70-mark end-semester paper

    • Staircases: types and design
    • Dog-legged staircase
    • Open-well staircase
  4. Unit 4: Beams Under Combined Bending, Shear and Torsion

    7 hours

    Behaviour of rectangular RC sections in torsion; design for combined bending and torsion and combined shear and torsion.

    Examined in the 70-mark end-semester paper

    • Design for shear
    • Bond, development length and torsion
  5. Unit 5: Axially and Eccentrically Loaded Columns

    8 hours

    Axially and uniaxially eccentrically loaded circular and rectangular columns; introduction to biaxial bending and interaction diagrams; circular columns with helical reinforcement.

    Examined in the 70-mark end-semester paper

    • Short columns under axial load
    • Columns with uniaxial and biaxial bending
    • Helically reinforced circular columns
  6. Unit 6: Column Footings

    7 hours

    Isolated square and rectangular footings; footings under eccentric load.

    Examined in the 70-mark end-semester paper

    • Isolated footings
    • Eccentrically loaded footings

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).