PAHSU TY Civil syllabus

PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020

Air and Noise Pollution and Control

CIVPEC-02C · Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Elective II options.

  1. Unit 1: Introduction to Air Pollution

    6 hours

    Composition and structure of the atmosphere; natural and man-made, primary and secondary, point, line and area sources; major pollutants, CFCs and greenhouse gases, industrial emissions; indoor air quality and odour; effects on health, vegetation, aquatic life and buildings.

    Examined in the 70-mark end-semester paper

    • Classification and sources of air pollutants
    • Sources and effects of indoor air pollution
    • Effects of air pollution on health, plants and property
  2. Unit 2: Pollutant Dispersion

    8 hours

    Atmospheric stability, adiabatic and environmental lapse rates, effect of wind, maximum mixing depth and ventilation coefficient; wind roses, plume behaviour, plume rise and effective stack height; the air quality index and comprehensive environmental pollution index.

    Examined in the 70-mark end-semester paper

    • Lapse rates and atmospheric stability
    • Wind rose diagrams
    • Plume behaviour
    • Stack height and plume rise
    • Air Quality Index and NCAP
  3. Unit 3: Impacts of Air Pollution and Dispersion Modelling

    8 hours

    Acid rain, global warming, smog, ozone depletion and urban heat islands; the Kyoto and Montreal protocols; air pollution episodes; dispersion modelling and the Gaussian plume model with ground-level concentrations.

    Examined in the 70-mark end-semester paper

    • Global effects of air pollution
    • International climate agreements
    • Gaussian dispersion model
  4. Unit 4: Air Sampling, Analysis and Legislation

    7 hours

    Sampling and measurement methods and instruments; ambient air quality and emission standards; pollution indices; the Air (Prevention and Control of Pollution) Act 1981.

    Examined in the 70-mark end-semester paper

    • Ambient air sampling
    • Chemical and instrumental analysis of air samples
    • Air quality and emission standards
    • Air pollution laws in India
  5. Unit 5: Control of Particulate and Gaseous Pollutants

    8 hours

    Removal of gases by adsorption, absorption and reaction; scrubbers, electrostatic precipitators, gravity settlers, cyclones and bag filters; biochemical and catalytic control.

    Examined in the 70-mark end-semester paper

    • Control of gaseous pollutants
    • Settling chambers and cyclones
    • Fabric filters and electrostatic precipitators
    • Scrubbers
  6. Unit 6: Noise: Effects, Standards, Monitoring and Control

    8 hours

    Sound power, intensity and pressure levels; point, line and multiple sources, outdoor and indoor propagation; psychoacoustics and noise criteria; health effects and annoyance ratings; infrasound, ultrasound, impulsive sound and sonic booms; noise standards and instruments.

    Examined in the 70-mark end-semester paper

    • Sound levels and noise propagation
    • Noise pollution and its control

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).