PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020
Mechanics of Materials
MECHPCC-03 · Semester III · 4 credits · ISE 30 + ESE 70
Unit 1: Simple Stresses and Strains
6 hoursTypes of stress and strain, Poisson's ratio; stresses and deformation in homogeneous and compound bars under axial load; stress-strain diagrams, Hooke's law, elastic constants and their relations; temperature stresses in bars.
Examined in the 70-mark end-semester paper
- Types of loads, stress and strain
- Hooke's law and elastic constants
- Relations between elastic constants
- Stress–strain diagrams and factor of safety
- Bars of varying section and composite bars
- Thermal stresses in plain and composite bars
Unit 2: Torsion of Circular Shafts; Strain Energy and Impact Load
8 hoursTheory of torsion and the torsion equation; shear stress and angle of twist in solid and hollow shafts for power transmission; strain energy, proof resilience and modulus of resilience; strain energy of axially loaded members under gradual, sudden and impact loads.
Examined in the 70-mark end-semester paper
- Torsion of circular shafts
- Power transmission by shafts: strength and rigidity
- Strain energy under gradual, sudden and impact loads
Unit 3: Shear Force and Bending Moment
6 hoursSF and BM diagrams for cantilevers and simply supported beams with or without overhang under point loads, UDL, combined loads, uniformly varying loads and couples; maximum SF and BM and the point of contraflexure; the relation between loading, shear force and bending moment.
Examined in the 70-mark end-semester paper
- Beams, supports and types of loading
- SFD and BMD for point loads and UDL
- SFD and BMD for UVL, couples and combined loads
- Relation between load, shear force and bending moment
- Maximum bending moment and point of contraflexure
Unit 4: Bending and Shear Stresses in Beams
8 hoursTheory of pure bending, assumptions and sign conventions; bending stresses in circular, rectangular, I- and T-sections; shear stress distribution in rectangular, I- and T-sections.
Examined in the 70-mark end-semester paper
- Theory of simple bending and the flexure formula
- Moment of inertia of common sections
- Bending stress distribution and section modulus
- Shear stress distribution in beams
Unit 5: Slope and Deflection of Beams
6 hoursSlope and deflection and their relation to bending moment; the moment-area method for cantilevers and simply supported beams under point loads and UDL.
Examined in the 70-mark end-semester paper
- Slope and deflection of beams
- Area-moment method
Unit 6: Principal Stresses and Strains
6 hoursNormal and shear stresses on oblique planes; principal stresses, strains and planes in two-dimensional stress; maximum shear stress by the analytical and Mohr's circle methods.
Examined in the 70-mark end-semester paper
- Stresses on an oblique plane
- Principal stresses and planes
- Mohr's circle for plane stress
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).