PAHSU SY E&TC syllabus

PAHSU · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Network Theory Analysis

ENTPCC-01 · Semester III · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Circuit Analysis and Network Theorems

    8 hours

    Types of network elements and sources, source transformation; mesh and nodal analysis, supermesh and supernode; superposition, Thevenin's, Norton's and maximum power transfer theorems, with DC numericals.

    Examined in the 70-mark end-semester paper

    • Mesh and nodal analysis with dependent sources
    • Supermesh and supernode analysis
    • Superposition and source transformation
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
  2. Unit 2: Resonance

    5 hours

    Series resonance: impedance, phase angle, voltage and current, effect of resistance on the frequency response, bandwidth, selectivity, magnification and Q factor; parallel (tank) resonance, variation of impedance with frequency, reactance curves; comparison and applications of series and parallel resonance.

    Examined in the 70-mark end-semester paper

    • Series resonance: bandwidth and selectivity
    • Parallel resonance and comparison with series resonance
  3. Unit 3: Two-Port Networks

    7 hours

    Open-circuit impedance (Z), short-circuit admittance (Y), transmission (ABCD) and hybrid (h) parameters; reciprocity and symmetry conditions; parallel, series and cascade interconnection of two-ports; T and π representation.

    Examined in the 70-mark end-semester paper

    • Two-port parameters: Z, Y, ABCD and h
    • Reciprocity and symmetry in two-port networks
    • Interconnection of two-port networks
  4. Unit 4: Transient Response

    8 hours

    Review of the Laplace transform; transient and steady-state DC voltage and current response of RL, RC and RLC circuits.

    Examined in the 70-mark end-semester paper

    • Initial and final conditions
    • Circuit analysis in the s-domain
    • Transient response of RL and RC circuits
    • Step response of RLC circuits and damping
  5. Unit 5: Network Function

    5 hours

    Complex frequency; driving-point and transfer functions of one- and two-port networks; poles and zeros of network functions and time-domain behaviour from the pole-zero plot.

    Examined in the 70-mark end-semester paper

    • Network functions: driving point and transfer
    • Poles and zeros of network functions
  6. Unit 6: Filters and Attenuators

    7 hours

    Classification and characteristics of filters; constant-k and m-derived low-pass, high-pass, band-pass and band-stop filters; the neper and the decibel; design of T, π and lattice attenuators.

    Examined in the 70-mark end-semester paper

    • Constant-k and m-derived filters
    • Symmetrical and asymmetrical networks, neper and decibel
    • Symmetrical T and π attenuators

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).