PAHSU · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Control System
ENTPCC-05 · Semester IV · 3 credits · ISE 30 + ESE 70
2 lecture hours and 1 tutorial hour a week, with 25 marks of internal continuous assessment on top of the 70 + 30 theory marks.
Unit 1: Introduction and Mathematical Modelling
7 hoursOpen- and closed-loop control systems, with liquid-level control and missile launching and guidance as examples; mathematical modelling of electrical systems with R, L and C; transfer functions of RLC circuits and of closed-loop systems.
Examined in the 70-mark end-semester paper
- Open-loop and closed-loop control systems
- Mathematical models of physical systems
- Transfer function, poles and zeros, order and type
Unit 2: System Representation and Components
6 hoursBlock-diagram representation and reduction; construction of signal flow graphs and Mason's gain formula.
Examined in the 70-mark end-semester paper
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
Unit 3: Stability and Error Coefficients
7 hoursAbsolute, conditional and relative stability; the Routh-Hurwitz criterion; steady-state errors and error constants of type 0, 1 and 2 systems.
Examined in the 70-mark end-semester paper
- Characteristic equation and pole locations
- Routh–Hurwitz stability criterion
- Steady-state error and static error constants
Unit 4: Stability Analysis
6 hoursThe asymptotic Bode plot and stability analysis with it; the need for compensation and lead, lag and lead-lag compensators.
Examined in the 70-mark end-semester paper
- Bode plot
- Gain margin and phase margin
- Lag and lead compensator design
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).