PAHSU SY E&TC syllabus

PAHSU · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Analog and Digital Communication

ENTPCC-03 · Semester III · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction to Analog Communication

    7 hours

    Elements of a communication system, baseband and carrier communication, modulation and demodulation, the need for and types of modulation; noise and its types; bandwidth; applications.

    Examined in the 70-mark end-semester paper

    • Elements and types of communication systems
    • Need for modulation and amplitude modulation
    • Sources and types of noise
  2. Unit 2: AM Transmission and Reception

    8 hours

    The AM transmitter, modulation index, generation and spectrum of DSB-FC; DSB-SC by multiplier, non-linear, switching and ring modulators; SSB-SC, ISB and VSB; TRF and superheterodyne receivers and their sensitivity, selectivity, fidelity and image-frequency rejection; rectifier and envelope detection, synchronous detection of DSB-SC.

    Examined in the 70-mark end-semester paper

    • AM spectrum, modulation index and power
    • DSB-SC modulation
    • Balanced modulator
    • SSB and VSB modulation
    • TRF and superheterodyne receivers
    • Receiver characteristics: sensitivity, selectivity, fidelity and image rejection
    • Envelope detection and the AM superheterodyne receiver
  3. Unit 3: FM Transmission and Reception

    6 hours

    Mathematical analysis of FM and PM, the FM spectrum and modulation index, narrowband and wideband FM; AM, FM and PM compared; direct and indirect FM generation; pre-emphasis and de-emphasis; slope detector and Foster-Seeley discriminator.

    Examined in the 70-mark end-semester paper

    • Frequency modulation and modulation index
    • FM spectrum, Bessel functions and Carson's rule
    • Narrowband and wideband FM
    • Phase modulation and its relation to FM
    • Direct FM generation: FET and varactor-diode modulators
    • FM generation: Armstrong's method
    • Pre-emphasis and de-emphasis
    • Slope and ratio detectors
    • Foster–Seeley discriminator
  4. Unit 4: Introduction to Digital Communication System

    7 hours

    Information theory: average and mutual information, entropy, joint and conditional entropy, information rate, redundancy and channel capacity; Shannon-Fano coding; the digital communication system compared with analog; introduction to pulse modulation.

    Examined in the 70-mark end-semester paper

    • Entropy and information
    • Discrete memoryless channels and mutual information
    • Channel capacity and the channel coding theorem
    • Huffman and Shannon–Fano coding
    • PAM, PWM and PPM
  5. Unit 5: Digital Modulation Techniques

    8 hours

    Uniform and non-uniform quantisation; PCM, differential PCM, delta modulation and its noise, ADM; line coding; binary ASK, FSK and PSK with coherent and non-coherent detection; DPSK, QPSK and QAM; comparison of digital modulation schemes.

    Examined in the 70-mark end-semester paper

    • Quantisation and companding
    • Pulse code modulation
    • Delta-sigma modulation and DPCM
    • Delta and adaptive delta modulation
    • Line coding formats
    • BASK, BFSK and BPSK
    • QPSK, OQPSK and M-ary PSK
    • M-ary QAM
    • Error probability of digital modulations
  6. Unit 6: Error Control Codes

    6 hours

    Linear block codes and examples, the generator matrix, systematic codes, the parity-check matrix, syndrome testing and error correction.

    Examined in the 70-mark end-semester paper

    • Linear block codes
    • Hamming codes and syndrome decoding

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).