PAHSU · Second Year B.Tech. Electrical Engineering · NEP 2020
Network Analysis
EEPCC-05 · Semester IV · 3 credits · ISE 30 + ESE 70
2 credits of theory (2 hours a week), with a lab for ICA.
Unit 1: Introduction to Electrical Network
5 hoursIdeal and practical sources and source transformation; network reduction; mesh and node analysis with dependent and independent sources for DC and AC networks, supernode and supermesh; coupled circuits and the dot convention.
Examined in the 70-mark end-semester paper
- Independent and dependent sources
- Source transformation
- Star-delta transformation
- Mesh analysis and supermesh
- Nodal analysis and supernode
- Dot convention for coupled circuits
Unit 2: Network Theorems
5 hoursSuperposition, Thevenin's, Norton's, maximum power transfer, reciprocity and compensation theorems applied to AC and DC circuits.
Examined in the 70-mark end-semester paper
- Superposition theorem
- Thevenin's and Norton's theorems
- Maximum power transfer theorem
- Reciprocity and Millman's theorems
- Compensation theorem
Unit 3: Network Topology
4 hoursGraph of a network, tree and co-tree; incidence, tie-set and cut-set matrices; the principle of duality.
Examined in the 70-mark end-semester paper
- Graph theory: incidence, loop and cut-set matrices
- Duality
Unit 4: Transient Response in Circuits: Classical Approach
5 hoursInitial and final conditions; general and particular solutions; transient response of RL, RC and RLC networks with DC supply in the time domain.
Examined in the 70-mark end-semester paper
- Initial and final conditions
- Time constants of RL and RC circuits
- Transient response of RL and RC circuits
- Transient response of RLC circuits
Unit 5: Transient Response in Circuits: Laplace Transform Approach
5 hoursStep, ramp and impulse inputs and their Laplace transforms; R, L and C in the s-domain and the transformed network; solving series and parallel RL, RC and RLC circuits by Laplace transform.
Examined in the 70-mark end-semester paper
- Response to step, ramp and exponential inputs
- Laplace transforms of circuit elements
- Transformed networks with initial conditions
- Solving RLC circuits with Laplace transforms
Unit 6: Two Port Networks
5 hoursZ, Y, H and transmission parameters and the relationships between parameter sets.
Examined in the 70-mark end-semester paper
- Z, Y and transmission parameters
- Hybrid parameters of two-port networks
- Relationships between two-port parameters
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).