PAHSU SY Electrical syllabus

PAHSU · Second Year B.Tech. Electrical Engineering · NEP 2020

DC Machines and Transformer

EEPCC-03 · Semester III · 4 credits · ISE 30 + ESE 70

  1. Unit 1: DC Generators

    8 hours

    Construction, principle and EMF equation; armature windings; types of generators and voltage build-up in a shunt generator; armature reaction, demagnetising and cross-magnetising MMFs and remedies; commutation.

    Examined in the 70-mark end-semester paper

    • Construction and EMF equation of DC generators
    • Lap and wave armature windings
    • Types of DC machines by excitation
    • Open-circuit characteristic of a DC generator
    • Armature reaction and commutation
  2. Unit 2: DC Motors

    8 hours

    Principle, back EMF and torque equation; types, losses, efficiency and the condition for maximum efficiency; characteristics and selection for applications; 3-point and 4-point starters; speed control of shunt and series motors.

    Examined in the 70-mark end-semester paper

    • Back EMF and torque equation of DC motors
    • Losses and efficiency of DC machines
    • Characteristics of DC shunt and series motors
    • DC motor starters
    • Speed control of DC motors
  3. Unit 3: Testing of DC Machines

    4 hours

    Direct and indirect testing: brake test, Swinburne's test and Hopkinson's test.

    Examined in the 70-mark end-semester paper

    • Brake test on a DC motor
    • Swinburne's and Hopkinson's tests
  4. Unit 4: Special Purpose Machines

    4 hours

    Construction, working principle, types, characteristics and applications of BLDC and stepper motors.

    Examined in the 70-mark end-semester paper

    • Brushless DC and stepper motors
    • Types of stepper motors
    • Stepper motor characteristics
  5. Unit 5: Single Phase Transformer

    8 hours

    Construction and types, EMF equation, voltage ratio and kVA rating; no-load and on-load operation with phasor diagrams; losses, efficiency and the condition for maximum efficiency; equivalent circuits and effect of load power factor; polarity, open-circuit and short-circuit tests; parallel operation; the autotransformer.

    Examined in the 70-mark end-semester paper

    • Ideal transformer
    • Phasor diagrams of a transformer
    • Equivalent circuit of a transformer
    • Efficiency and all-day efficiency
    • Voltage regulation of a transformer
    • Polarity test
    • Open-circuit and short-circuit tests on transformers
    • Parallel operation and load sharing
    • Autotransformers
  6. Unit 6: Three Phase Transformers

    8 hours

    Constructional features; star/star, delta/delta, star/delta, delta/star and zigzag connections and terminal labelling; vector groups and choice of connection; magnetising inrush; three-winding transformers; open delta and the Scott connection; on-load and off-load tap changing.

    Examined in the 70-mark end-semester paper

    • Three-phase transformer connections
    • Vector groups
    • Buchholz relay and inrush
    • Three-winding transformers
    • Scott and V-V connections
    • On-load tap changers

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).