PAHSU SY Electrical syllabus

PAHSU · Second Year B.Tech. Electrical Engineering · NEP 2020

AC Machines

EEPCC-06 · Semester IV · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Introduction to AC Machines and Three Phase Induction Motor

    7 hours

    Classification of AC machines; stator and squirrel-cage and wound rotors; rotating magnetic field, principle and slip; rotor frequency, current and power factor; power flow, losses and efficiency; torque equation, maximum, starting and full-load torque; torque-slip characteristics and the effect of rotor resistance; crawling and cogging.

    Examined in the 70-mark end-semester paper

    • Construction and rotating magnetic field of induction motors
    • Rotor EMF, frequency and current
    • Losses, efficiency and maximum output
    • Torque equations and torque-slip characteristics
    • Condition for maximum torque
    • Cogging and crawling
  2. Unit 2: Starting and Speed Control of Induction Motor

    6 hours

    Need for starters; DOL, star-delta, autotransformer and rotor resistance starters; stator-side speed control by voltage, frequency and pole changing; rotor-side control by rotor resistance and slip power recovery.

    Examined in the 70-mark end-semester paper

    • Starters for three-phase induction motors
    • Speed control of induction motors
    • Slip power recovery and rotor resistance control
  3. Unit 3: Performance of Three Phase Induction Motor

    7 hours

    Equivalent circuit; stator resistance, no-load and blocked-rotor tests; constructing the circle diagram and reading performance from it; the double-cage motor and its equivalent circuit; the induction generator.

    Examined in the 70-mark end-semester paper

    • Equivalent circuit and phasor diagram of induction motors
    • No-load and blocked-rotor tests
    • Circle diagram
    • Double-cage and deep-bar induction motors
    • Induction generators
  4. Unit 4: Single Phase Induction Motor

    7 hours

    Principle; double revolving field and cross-field theories; types by starting method and their torque-slip characteristics; equivalent circuit and its parameters from open- and short-circuit tests.

    Examined in the 70-mark end-semester paper

    • Double revolving field theory
    • Starting methods and types of single-phase motors
    • Equivalent circuit of a single-phase induction motor
    • Tests on single-phase induction motors
  5. Unit 5: Synchronous Generator

    7 hours

    Salient and non-salient construction, principle, winding factors and EMF equation; armature reaction, equivalent circuit and phasor diagram; voltage regulation by the EMF, MMF and ZPF methods; parallel operation and methods of synchronising.

    Examined in the 70-mark end-semester paper

    • Construction of synchronous machines
    • EMF equation and winding factors
    • Armature reaction
    • Synchronous reactance and phasor diagram
    • EMF and MMF methods of regulation
    • Potier triangle method
    • Parallel operation of alternators
    • Synchronising an alternator
  6. Unit 6: Synchronous Motor

    6 hours

    Principle and methods of starting; equivalent circuit, performance and phasor diagrams at different excitations; losses and efficiency; V and inverted V curves; hunting, its causes and remedies.

    Examined in the 70-mark end-semester paper

    • Starting of synchronous motors
    • Torque angle and equivalent circuit
    • Losses and efficiency of synchronous machines
    • V curves and inverted V curves
    • Hunting

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).