PAHSU SY Civil syllabus

PAHSU · Second Year B.Tech. Civil Engineering · NEP 2020

Surveying and Geomatics

CIVPCC-03 · Semester III · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Levelling Instruments and Applications

    8 hours

    Construction, temporary adjustments and use of the auto level and tilting level; direct and indirect contouring, interpolation and uses of contour maps.

    Examined in the 70-mark end-semester paper

    • Levels and levelling terms
    • Reduced levels: collimation and rise-and-fall methods
    • Contours and contouring
  2. Unit 2: Angles and Directions

    8 hours

    Theodolite construction, temporary adjustments and use for horizontal, deflection and vertical angles, bearings, prolonging a line and setting out angles; theodolite traversing, consecutive and independent coordinates, Gale's traverse table and adjustment of a closed traverse.

    Examined in the 70-mark end-semester paper

    • Theodolite and its adjustments
    • Measuring horizontal and vertical angles
    • Latitudes and departures
    • Balancing a traverse
  3. Unit 3: Modern Surveying Instruments

    7 hours

    Laser and digital levels; EDM instruments, electromagnetic waves, phase comparison and modulation; total stations: types, adjustments and on-board programs (resection, traversing, missing-line measurement, remote elevation, COGO), and their use for contouring, stake-out, land-use surveys and earthwork.

    Examined in the 70-mark end-semester paper

    • Laser and digital levels
    • Electronic distance measurement
    • Total station surveying
  4. Unit 4: Global Positioning System

    8 hours

    Principle of GPS and trilateration, space, control and user segments, navigational, surveying and geodetic receivers; GPS observables, absolute, relative, differential and kinematic positioning; computation of coordinates, GPS and mean-sea-level heights, applications.

    Examined in the 70-mark end-semester paper

    • GNSS: GPS and NavIC
    • Differential GPS
    • GPS receivers and field and office software
    • GNSS errors and corrections
  5. Unit 5: Remote Sensing Techniques

    7 hours

    Terrestrial and aerial photogrammetry, the photo-theodolite and aerial camera; scale, relief displacement and flight planning of vertical photographs; stereoscopes and the parallax bar; introduction to LiDAR and drones; electromagnetic radiation, the spectrum, atmospheric effects and energy interactions with the earth's surface; applications of remote sensing.

    Examined in the 70-mark end-semester paper

    • Terrestrial photogrammetry and the photo-theodolite
    • Aerial photographs: scale, relief displacement and flying height
    • Flight planning
    • Stereoscopy and parallax heights
    • Modern surveying: drones, laser scanning and DGPS
    • Electromagnetic radiation and the spectrum
  6. Unit 6: GIS and Project Surveys

    7 hours

    Information systems, spatial and non-spatial data, components, hardware and software of GIS; vector and raster data and data entry by keyboard, digitiser and scanner; project surveys: building line-out and layout, route surveys, culverts and bridges, tunnels and mines (centre-line and level transfer, the Weisbach triangle).

    Examined in the 70-mark end-semester paper

    • Geo-informatics and its components
    • Vector and raster data models
    • Data input and attribute databases
    • Setting out works and route surveys
    • Mine and tunnel surveying

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).