PAHSU SY Civil syllabus

PAHSU · Second Year B.Tech. Civil Engineering · NEP 2020

Structural Mechanics-II

CIVPCC-04 · Semester IV · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Combined Direct and Bending Stresses

    6 hours

    Eccentric loads on short columns, the kern of a section, eccentricity about both axes; chimneys under wind pressure; simple problems on dams and retaining walls.

    Examined in the 70-mark end-semester paper

    • Direct and bending stresses: eccentric loading
    • Core of a section
    • Retaining walls, dams and chimneys
  2. Unit 2: Axially Loaded Long Columns

    5 hours

    Effective length and slenderness ratio; crippling load by Euler's and Rankine's formulae, assumptions and limitations.

    Examined in the 70-mark end-semester paper

    • Euler's theory of columns and effective length
    • Rankine's formula
  3. Unit 3: Slope and Deflection of Determinate Beams

    8 hours

    Moment-area and conjugate beam methods; deflection of beams by the strain energy method.

    Examined in the 70-mark end-semester paper

    • Slope and deflection by Macaulay's and moment-area methods
    • Conjugate beam method
    • Strain energy and Castigliano's theorems
  4. Unit 4: Indeterminate Structures and the Flexibility Method

    9 hours

    Indeterminate structures and methods of analysis, static and kinematic indeterminacy and degrees of freedom; the flexibility equation, flexibility coefficients and matrix; beams and portal frames (static indeterminacy up to 3).

    Examined in the 70-mark end-semester paper

    • Static and kinematic indeterminacy
    • Flexibility and stiffness concepts
    • Flexibility method for beams and frames
  5. Unit 5: Moment Distribution Method

    7 hours

    Stiffness and relative stiffness of members, distribution factors and the concept of moment distribution; beams and non-sway portal frames.

    Examined in the 70-mark end-semester paper

    • Stiffness, carry-over and distribution factors
    • Beams by moment distribution
    • Non-sway frames by moment distribution
  6. Unit 6: Stiffness Method for Beams and Frames

    7 hours

    Linearly elastic structures, the stiffness equation, stiffness coefficients and matrix; beams (kinematic indeterminacy up to 3) including sinking of supports; portal frames.

    Examined in the 70-mark end-semester paper

    • Stiffness method: structure and member approaches
    • Beams by the stiffness method
    • Portal frames by the stiffness method

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).