PAHSU SY Civil syllabus

PAHSU · Second Year B.Tech. Civil Engineering · NEP 2020

Structural Mechanics-I

CIVPCC-01 · Semester III · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Simple Stresses and Strains

    7 hours

    Behaviour of engineering materials under axial loading; simple stresses and strains, Hooke's law, stress-strain curves of ductile and brittle materials; elastic constants, working stress and factor of safety; stresses and strains in three dimensions, complementary shear stress and the relations between elastic constants; St. Venant's principle; compound bars under axial load.

    Examined in the 70-mark end-semester paper

    • Stress, strain and stress–strain diagrams
    • Elastic constants and their relations
    • Bars of composite sections
  2. Unit 2: Principal Stresses and Strains; Combined Bending and Torsion

    11 hours

    Normal and shear stresses on an inclined plane, principal planes, principal stresses and strains in two dimensions, principal stresses in beams and stress trajectories; shafts under simultaneous bending, torsion and thrust, equivalent torque and equivalent moment for solid circular shafts.

    Examined in the 70-mark end-semester paper

    • Stresses on an oblique plane
    • Principal stresses and maximum shear stress
    • Mohr's circle
    • Combined bending and torsion of shafts
  3. Unit 3: Three-Hinged Arches

    4 hours

    Types of arches; analysis of parabolic three-hinged arches with supports at the same level: horizontal thrust, radial shear and normal thrust.

    Examined in the 70-mark end-semester paper

    • Three-hinged parabolic arches
  4. Unit 4: Shear Force and Bending Moment

    7 hours

    Shear force and bending moment diagrams of statically determinate beams under point loads (including inclined loads), uniformly distributed and uniformly varying loads and couples; the relation between load intensity, shear force and bending moment.

    Examined in the 70-mark end-semester paper

    • Shear force and bending moment: concepts and relations
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL and couples
    • Points of contraflexure
  5. Unit 5: Bending and Shear Stresses in Beams

    11 hours

    Simple bending theory and the flexure formula, moment of resistance of rectangular, circular, flanged and built-up sections; distribution of shear stress across rectangular, triangular, circular, T and I sections.

    Examined in the 70-mark end-semester paper

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and moment of resistance
    • Shear stress formula
    • Shear stress distribution across sections
  6. Unit 6: Influence Line Diagrams and Rolling Loads

    5 hours

    Influence line diagrams and the Muller-Breslau principle applied to simple and compound determinate beams for support reactions, shear force and bending moment at a section.

    Examined in the 70-mark end-semester paper

    • Influence lines for beams
    • Müller-Breslau principle
    • Rolling loads and absolute maximum bending moment

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).