PAHSU SY Civil syllabus

PAHSU · Second Year B.Tech. Civil Engineering · NEP 2020

Environmental Engineering

CIVPCC-06 · Semester IV · 4 credits · ISE 30 + ESE 70

  1. Unit 1: Quantity and Quality of Water

    6 hours

    Sources of water and intake works; water demand, its fluctuation and the design period; population forecasting and fire demand; water quality parameters and drinking-water standards.

    Examined in the 70-mark end-semester paper

    • Intake structures
    • Water supply schemes and design period
    • Water demand and population forecasting
    • Water quality and IS 10500
  2. Unit 2: Water Treatment Processes

    8 hours

    Treatment flow sheets for surface and ground water; aeration; plain and chemically assisted sedimentation, tank types and tube settlers; coagulation, flocculation and the clariflocculator; rapid and slow sand filters; disinfection and chlorination including break-point chlorination; lime-soda, ion exchange, reverse osmosis, ultrafiltration and electrodialysis; fluoridation and defluoridation.

    Examined in the 70-mark end-semester paper

    • Aeration
    • Sedimentation and settling tanks
    • Tube settlers
    • Coagulation and flocculation
    • Rapid sand filters
    • Slow sand and pressure filters
    • Disinfection and chlorination
    • Softening and desalination
    • Iron, manganese and fluoride removal
  3. Unit 3: Distribution of Water

    9 hours

    Distribution systems and methods of distribution, appurtenances, system requirements, the equivalent pipe and distribution reservoirs.

    Examined in the 70-mark end-semester paper

    • Water distribution systems
    • Storage reservoir capacity
  4. Unit 4: Collection and Conveyance of Sewage

    8 hours

    Sources and flow of wastewater, characteristics of municipal wastewater; sewerage systems and layout, types of sewers, appurtenances, sanitary and storm sewers, sewage pumping stations.

    Examined in the 70-mark end-semester paper

    • Quantity of sewage and storm water
    • Wastewater characteristics and standards
    • Separate and combined sewerage systems
    • Sewer construction, appurtenances and maintenance
  5. Unit 5: Wastewater Treatment

    10 hours

    Screening, comminution, grit removal, oil and grease traps and chemical precipitation; the activated sludge process and its modifications, MBBR, SBR and MBR, trickling filters and secondary clarifiers; waste stabilisation ponds, oxidation ditches and septic tanks.

    Examined in the 70-mark end-semester paper

    • Screens and grit chambers
    • Skimming tanks and flotation
    • Activated sludge process
    • Sequencing batch reactor
    • UASB reactors and membrane bioreactors
    • Trickling filters
    • Oxidation ponds and sludge disposal
    • Design of a septic tank
  6. Unit 6: Disposal of Wastewater

    8 hours

    Stream pollution and self-purification, the DO sag curve and Streeter-Phelps equation; small and decentralised treatment: root-zone technology, constructed wetlands, duckweed ponds, fluidised aerobic beds, UASB and anaerobic baffled reactors.

    Examined in the 70-mark end-semester paper

    • Self-purification of streams
    • Constructed wetlands and root-zone treatment

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).