PAHSU Final Year Mechanical syllabus

PAHSU · Final Year B.Tech. Mechanical Engineering · NEP 2020

Refrigeration and Air Conditioning

MECHPCC-14 · Semester VII · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Basics of Refrigeration and Refrigerants

    5 hours

    Units and applications of refrigeration; the reversed Carnot cycle with a vapour refrigerant and COP; classification, properties, designation and selection of refrigerants; secondary refrigerants; ozone depletion, global warming and TEWI; alternative refrigerants.

    Examined in the 70-mark end-semester paper

    • Carnot refrigeration cycle and COP
    • Refrigerants: designation, ODP and GWP
    • Secondary refrigerants, zeotropes and azeotropes
  2. Unit 2: Vapour Compression Refrigeration Systems

    5 hours

    The simple vapour compression cycle on T-s and p-h charts; subcooling and superheating; actual cycles and the effect of operating conditions; improving COP; the simple vapour absorption system compared with VCRS.

    Examined in the 70-mark end-semester paper

    • Vapour compression cycle
    • Effect of operating conditions on the VCC
    • Performance ratings: COP, EER and SEER
    • Vapour absorption refrigeration
  3. Unit 3: HVAC Systems

    5 hours

    Central and DX systems compared; VRF systems; heat recovery and desiccant wheels; air-handling and fan-coil units; the role of the HVAC engineer.

    Examined in the 70-mark end-semester paper

    • Modern HVAC systems
    • VRF and VAV systems
    • Desiccant air conditioning
    • Air-handling units and their components
    • Fan coil units and noise control
  4. Unit 4: Psychrometry

    6 hours

    Psychrometric terms, Dalton's law and the enthalpy of moist air; psychrometric tables, charts and processes; SHF, BPF, ADP and the coil condition line; human comfort and the comfort chart, infiltration, ventilation and indoor air quality.

    Examined in the 70-mark end-semester paper

    • Psychrometric properties of air
    • Psychrometric processes and the chart
    • Bypass factor, ADP and sensible heat factors
    • Thermal comfort and indoor air quality
    • Ventilation and infiltration
  5. Unit 5: Heating and Cooling Load Calculations

    5 hours

    Components of the refrigeration and air-conditioning load; ventilation to ASHRAE 62.1; design conditions; U-values of building materials; cooling load and RSHF and GSHF analysis.

    Examined in the 70-mark end-semester paper

    • Cooling load estimation
    • Inside and outside design conditions
  6. Unit 6: Duct Design

    4 hours

    Classification of ducts, duct pressures and flow, equivalent diameter; equal-friction, velocity-reduction and static-regain design; fans for air conditioning, fan laws and external static pressure.

    Examined in the 70-mark end-semester paper

    • Duct design and pressure losses
    • Duct design methods
    • Air distribution and fans

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).