PAHSU Final Year E&TC syllabus

PAHSU · Final Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Microwave Engineering

ENTPCC-13 · Semester VII · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Microwave Waveguides

    7 hours

    History, frequency bands, hazards and applications of microwaves; transmission lines and waveguides compared; solving the wave equation in rectangular coordinates, TE and TM modes; cut-off frequency and wavelength, phase and group velocity, guide wavelength; power transmission and losses.

    Examined in the 70-mark end-semester paper

    • Microwave frequency bands and applications
    • Microwave radiation hazards
    • Rectangular waveguides and modes
    • TE and TM field components
    • Cut-off frequency and dominant mode
    • Phase and group velocity in waveguides
  2. Unit 2: Microwave Components

    5 hours

    Construction and operation of E-plane, H-plane and magic tees, directional couplers, isolators and circulators.

    Examined in the 70-mark end-semester paper

    • E-plane, H-plane and magic tees
    • Directional couplers
    • Isolators and circulators
  3. Unit 3: Microwave Network Analysis

    10 hours

    Impedance, admittance and transmission (ABCD) matrices and two-port equivalent circuits; the scattering matrix, its significance, formulation and properties; S-matrices of E-plane, H-plane and magic tees and the directional coupler.

    Examined in the 70-mark end-semester paper

    • Impedance, admittance and ABCD matrices
    • Scattering parameters
    • S-matrices of tees, couplers, isolators and circulators
  4. Unit 4: Microwave Tubes

    8 hours

    Limits of conventional tubes, O- and M-type tubes, re-entrant cavities and velocity modulation; the two-cavity and reflex klystrons with bunching and the Applegate diagram; the eight-cavity magnetron, Hull cut-off and π-mode; slow-wave structures and the helix TWT (numericals, no derivations).

    Examined in the 70-mark end-semester paper

    • Limitations of conventional tubes at microwaves
    • Velocity modulation and klystrons
    • Reflex klystron
    • Cavity magnetron
    • Hull cut-off and Hartree conditions
    • Helix travelling wave tube
  5. Unit 5: Microwave Solid-State Devices

    8 hours

    Structure, operation, specifications and applications of varactor, PIN, Schottky-barrier, tunnel, Gunn and IMPATT diodes.

    Examined in the 70-mark end-semester paper

    • Varactor diodes and parametric amplifiers
    • PIN, tunnel and Schottky diodes
    • Gunn diode
    • IMPATT and TRAPATT diodes
  6. Unit 6: Microwave Measurements

    6 hours

    Measurement of power, frequency, attenuation and VSWR.

    Examined in the 70-mark end-semester paper

    • Microwave bench
    • Microwave measurements: VSWR, power and impedance
    • Frequency, attenuation and phase-shift measurement

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).