PAHSU · Final Year B.Tech. Electrical Engineering · NEP 2020
Switchgear & Protection
EEPCC-14 · Semester VII · 3 credits · ISE 30 + ESE 70
Unit 1: Protective Relays
5 hoursNeed for and desirable qualities of protective relaying; zones, primary and backup protection; attracted-armature, balanced-beam and moving-coil relays; induction disc and cup relays and torque production; static relays.
Examined in the 70-mark end-semester paper
- Summation transformers and desirable qualities of relaying
- Zones of protection
- Primary and backup protection
- Induction relay, PSM and TSM
- Static relays
Unit 2: Overcurrent Protection and Differential Protection
6 hoursRewirable and HRC fuses, their characteristics, application and selection; plug setting and time setting multiplier; radial feeder and ring main protection and relay coordination; earth fault, phase fault and directional relays; static and microprocessor-based overcurrent relays.
Examined in the 70-mark end-semester paper
- HRC fuses: characteristics, selection and discrimination
- Overcurrent and directional relays
- Protection of parallel feeders and ring mains
- Earth fault and phase fault protection
- Microprocessor-based overcurrent and impedance relays
Unit 3: Distance Protection
5 hoursImpedance, reactance and admittance characteristics; relay settings for three-zone protection; carrier-aided schemes; electromagnetic, static and microprocessor-based impedance, reactance and mho relays for line protection.
Examined in the 70-mark end-semester paper
- Distance relays: impedance, reactance and mho
- Three-zone distance protection
- Carrier protection and PLCC
Unit 4: Equipment Protection
6 hoursTransformer faults, overcurrent and percentage differential protection, Buchholz relay and over-fluxing protection; generator stator earth and phase faults, unbalance, rotor overheating and earth fault, loss of excitation, motoring and generator-transformer units; induction motor protection; differential protection of busbars.
Examined in the 70-mark end-semester paper
- Transformer differential protection
- Buchholz relay and inrush
- Alternator protection
- Induction motor protection
- Bus zone and frame leakage protection
Unit 5: Circuit Breakers
5 hoursArc voltage-current characteristics; DC and AC arc interruption, high-resistance and current-zero interruption; transient restriking voltage, recovery voltage and RRRV; resistance switching, current chopping and capacitive current interruption.
Examined in the 70-mark end-semester paper
- Arc formation and interruption
- Restriking voltage and RRRV
- Resistance switching
- Current chopping
- Interruption of capacitive current
Unit 6: Types of Circuit Breakers
5 hoursClassification; bulk-oil and minimum-oil, air-break and air-blast, SF6 and vacuum breakers; MCB and MCCB; HVDC breakers; ratings and testing of breakers; isolators.
Examined in the 70-mark end-semester paper
- Air-break, oil and air-blast circuit breakers
- SF6 circuit breaker
- Vacuum circuit breaker
- HVDC circuit breakers and DC current interruption
- Circuit breaker ratings
- Testing of circuit breakers and transformers
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).