PAHSU · Final Year B.Tech. Civil Engineering · NEP 2020
Hydraulic Structures and Water Power Engineering
CIVPEC-04A · Elective IV · Semester VII · 4 credits · End-semester 100 only
One of the Elective IV options.
Unit 1: Dams and Reservoir Planning
6 hoursNecessity and types of dams, selection of site and type, dam instrumentation; reservoir planning, storage calculations, control levels, sedimentation surveys (including by remote sensing) and losses.
Examined in the 100-mark end-semester paper
- Classification of dams
- Selection of dam site and type
- Dam instrumentation
- Reservoir planning and control levels
- Reservoir sedimentation and trap efficiency
Unit 2: Gravity and Arch Dams
9 hoursForces on gravity dams, design criteria, theoretical and practical profiles, high and low dams, stability analysis, materials and construction, galleries and joints, computer-aided design and decommissioning; types and layout of constant-angle and constant-radius arch dams and the forces on them.
Examined in the 100-mark end-semester paper
- Forces on gravity dams
- Elementary profile of a gravity dam
- Low and high gravity dams and the practical profile
- Stability and modes of failure
- Construction of gravity dams
- Arch and buttress dams
Unit 3: Earth Dams, Spillways and Outlets
9 hoursComponents and design criteria of earth dams, seepage through and below them, slip circle stability, inverted filters, drainage and relief wells, construction; types and choice of spillway, elementary hydraulic design, jump height and tail-water rating curves, energy dissipation and gates; outlets through dams.
Examined in the 100-mark end-semester paper
- Types and components of earth dams
- Phreatic line and seepage
- Stability by the Swedish slip circle
- Seepage control
- Types of spillways
- Energy dissipation and stilling basins
- Spillway gates
- Outlets in dams
Unit 4: Weirs, Canals and Canal Structures
10 hoursSeepage theories for weirs on permeable foundations: Bligh's creep and Khosla's theory, exit gradient, piping and undercutting; Kolhapur-type weirs; canal types and alignment, Kennedy's and Lacey's silt theories, canal losses and lining; aqueducts, culverts, super-passages, level crossings, cross and head regulators, canal siphons, escapes, falls and outlets.
Examined in the 100-mark end-semester paper
- Bligh's and Lane's theories
- Khosla's theory
- Minor irrigation: percolation tanks, bandharas and KT weirs
- Classification of canals
- Kennedy's theory
- Lacey's regime theory
- Canal lining
- Cross-drainage works
- Canal outlets, escapes and regulators
- Canal falls and their types
Unit 5: River Training and Waterlogging
6 hoursTypes of rivers and meandering, river training works and navigation; causes, effects, prevention and cure of waterlogging, alkaline soils, efflorescence and drainage.
Examined in the 100-mark end-semester paper
- River behaviour and river training
- River training works: levees, guide banks and groynes
- Waterlogging
- Subsurface drainage systems
Unit 6: Hydropower Engineering
8 hoursPower demand and competing water uses; types of water power plants and small hydro, their layout and components; intakes, conveyance, surge tanks, powerhouse types and layout, tail race; managing and calculating power demand.
Examined in the 100-mark end-semester paper
- Elements of a hydropower scheme
- Classification of hydropower plants
- Small, mini and tidal hydropower
- Intakes and trash racks
- Surge tanks
- Powerhouse layout
- Load curves and load factors
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).